758357
3
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
3.
Tool Use
DON’T FORCE TOOL
It will do the job better and safer at the rate for which
itwas designed.
USE THE RIGHT TOOL
Don’t force a small tool or attachment to do the job of
aheavy duty tool. Don’t used tool for purpose not
intended—for example, don’t use a circular saw for
cutting tree limbs or logs.
SECURE WORK
Use clamps or a vise to hold work. It’s safer than
using your hand and it frees both hands to operate the
tool.
NEVER LEAVE TOOL RUNNING UNATTENDED
Turn power off. Don’t leave tool until it comes to a
complete stop.
Tool Care
DO NOT ALTER OR MISUSE TOOL
These tools are precision built. Any alteration or mod-
ification not specified is misuse and may result in dan-
gerous conditions.
AVOID GASEOUS AREAS
Do not operate electric tools in a gaseous or explo-
sive atmosphere. Motors in these tools normally
spark, and may result in a dangerous condition.
MAINTAIN TOOLS WITH CARE
Keep tools sharp and clean for best and safest per-
formance. Follow instructions for lubricating and
changing accessories. Inspect tool cords periodically
and if damaged, have repaired by authorized service
facility. Inspect extension cords periodically and
replace if damaged. Keep handles dry, clean and free
from oil and grease.
Before connecting the tool to a power
source (receptacle, outlet, etc.), be
sure voltage supplied is the same as that specified
on the nameplate of the tool. Apower source with a
voltage greater than that specified for the tool can
result in serious injury to the user, as well as damage
to the tool. If in doubt, DO NOT PLUG IN THE TOOL.
Using a power source with a voltage less than the
nameplate rating is harmful to the motor
.
General Safety Rules
WARNING
!
For your own safety, do not operate your scroll saw
until it is completely assembled and installed according
to the instructions...and until you have read and under-
stood the following:
1. General Safety Rules ....................................2-4
2. Motor Specifications and Electrical
Requirements ........................................................6
3. Getting to Know Your Scroll Saw....................9
4. Operating Adjustments ............................10-13
5. Basic Scroll Saw Operations ....................14-16
6. Maintaining Your Scroll Saw..........................17
7. Troubleshooting ..............................................17
8. STABILITY OF SAW
Your Scroll Saw must be bolted securely to a stand or
workbench. In addition, if there is any tendency for the
Scroll Saw to tip over or move during certain opera-
tions, such as cutting long, heavy boards, bolt your
Scroll Saw stand or workbench to the floor.
9. LOCATION
This Scroll Saw is intended for indoor use only.
10. PROTECTION: Eyes, hands, face, ears and
body.
TO AVOID BEING PULLED INTO THE BLADE—
DO NOT WEAR: Loose Fitting Gloves
Necktie
Loose Clothing
Jewelry
DO: TIE BACK LONG HAIR
ROLL LONG SLEEVES ABOVE ELBOWS
a. If any part of your saw is missing, malfunctioning,
has been damaged or broken . . . such as the motor
switch, or other operating control, a safety device or the
power cord...cease operating immediately until the par-
ticular part is properly repaired or replaced.
b. Do not cut piece too small to hold by hand.
HINT: When making a very small cut out, always
secure the workpiece to a scrap piece of plywood with
double-faced tape. This way, the work is supported and
your fingers are away from the blade.
Additional Safety Rules for Scroll Saws
SM 2610957121 05-08 6/5/08 7:35 AM Page 3
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 3335-01 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 3335-01 in de taal/talen: Engels, Frans, Spaans als bijlage per email.

De handleiding is 3,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info