758622
8
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
8
MAINTENANCE / SERVICE
This tool is not intended for
professional use
Protect the measuring tool against
moisture and direct sun light
Do not subject the measuring
tool to extreme temperatures or
variations in temperature (the
accuracy of the measuring tool can
be impaired)
-as an example, do not leave it in
vehicles for long time
-allow the measuring tool to adjust
to the ambient temperature before
putting it into operation
Avoid heavy impact to or falling
down of the measuring tool
-damage to the measuring tool can
impair its accuracy
Keep the measuring tool clean at all
times
Do not immerse the measuring tool in
water or other uids
Wipe o debris using a moist and
soft cloth
Do not use any cleaning agents or
solvents
Regularly clean the surfaces at the exit
opening of the laser in particular, and
pay attention to any u of bres
If the tool should fail despite the care
taken in manufacturing and testing
procedures, repair should be carried
out by an after-sales service centre for
SKIL power tools
-send the tool undismantled
together with proof of purchase to
your dealer or the nearest SKIL
service station (addresses as well
as the service diagram of the tool
are listed on www.skil.com)
Be aware that damage due to overload
or improper handling of the tool will
be excluded from the warranty (for
the SKIL warranty conditions see
www.skil.com or ask your dealer)
ENVIRONMENT
Do not dispose of electric
tools, batteries, accessories
and packaging together with
household waste material (only for
EU countries)
-in observance of European Directive
-position the protractor to a corner or
an edge q
-mounting options 7a, 7b, 7c, or
7d (with screw holes P) can also
be used for setting the protractor on
oors or ceiling
-turn on the tool
-rotate the tool to the desired angle
Digital levelling
-with the laser beam turned o, the
tool can be used as digital level
-place the tool with the angle
measurement base F on the surface
to be measured w
-alternatively, use magnetic edge E
to attach the tool to a ferrous surface
-the display shows the angle
between the surface and absolute
level
! if the display shows --- the tool is
inclined to forward or backward
too much and the measurement
cannot be made
-to level or plumb the working
surface, move the surface until the
display shows 0º or 90º
-if the deviation is within ±10º of
0° and 90°, ne-tuning arrows are
shown which vary in direction and
height relative to the target e
APPLICATION ADVICE
Always use the centre of the laser
line for marking (the width of the
laser line changes with the distance)
Laser viewing glasses 1 (not
standard included)
-laser viewing glasses R 1 lter out
the ambient light
-this makes the light of the laser
appear brighter for the eyes
-do not use the laser viewing
glasses as safety goggles (the
laser viewing glasses are used
for improved visualisation of the
laser beam, but they do not protect
against laser radiation)
-do not use the laser viewing
glasses as sun glasses or in
 (the laser viewing glasses do
not aord complete UV protection
and reduce colour perception)
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 1900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 1900 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info