758622
7
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
7
! the laser beam is automatically
activated when the tool is turned
on
-press main button B briey to turn
on/o the laser beam
! 
the tool will automatically turn

-press and hold main button B to turn
o the tool
Projecting on walls
-mark the point where the laser line
should be projected
-place the wall mount base H with
the marked point centered in the
viewing window K
-mounting options:
1) use adhesive putty (included) on
surfaces L 7a or use tape (not
included) to mount base on dry and
clean surfaces 7b
-the adhesive putty may used
repeatedly
-to keep good adhesion, wash the
putty frequently and store it in the
adhesive putty storage S
-remove the wall-mount base from
the wall slowly after using, any
residue of the adhesive putty on the
wall can be cleaned by rolling the
adhesive putty over the residue
2) use pins (not included) through
pin holes N to mount base on soft
materials (plasterboard, soft wood)
7c
! be aware of sharp pins
3) use a screw or nail (not included)
through viewing window / screw
hole K to mount base 7d
4) use the magnet in base to mount it
on ferrous metals 7e
-attach tool to wall mount base
! ensure that clip ring J clips into
slot G on bottom of the tool
-rotate tool freely to the desired
angle 8
Projecting on oors
-when projecting a laser line on the
oor the digital angle indictation
shows ---
-use the protractor M to adjust the
laser line to any angle
-attach the wall mount base H to the
protractor M as illustrated 9
-attach tool to wall mount base
unintentionally blind other persons or
themselves)
Do not operate the measuring tool
in explosive environments, such

liquids, gases or dusts (sparks can
be created in the measuring tool which
may ignite the dust or fumes)
Keep the measuring tool away from
cardiac pacemakers (the magnet
inside the measuring tool generates
a eld that can impair the function of
cardiac pacemakers)
Keep the measuring tool away
from magnetic data media and
magnetically-sensitive equipment
(the eect of the magnet can lead to
irreversible data loss)
EXPLANATION OF SYMBOLS ON
TOOL
2 Read the instruction manual before
use
3 Do not dispose of electric tools and
batteries together with household
waste material
4 Laser radiation / Do not stare into
beam / Class 2 laser product
USE
Inserting/replacing the batteries 5
-alkali-manganese batteries are
recommended for the measuring
tool
-do not use rechargeable batteries
-remove cover A
-insert 2 x AAA batteries (pay
attention to correct polarisation)
-always replace all batteries at the
same time
-only use batteries from one brand
and with the identical capacity
-mount cover A
-remove the batteries from the
measuring tool when not using
it for extended periods (when
storing for extended periods,
the batteries can corrode and
self-discharge)
Battery level indicator 6
-during use the battery level indicator
on the display indicates the
remaining battery capacity
On/o
-press and hold main button B to turn
on the tool
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Skil 1900 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Skil 1900 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 4,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info