521719
5
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
Siemens / Building Technologies / HVAC Products CE1G2217xx 24.04.2009 5/22
PID 6 Fast controlled systems:
For locations with significant temperature
variations.
Difficult controlled systems:
Proper on / off controller with a switching
differential of 0.5 C.
4.2.5 Protection mode
Use operating mode selector to select symbol (also
refer to Fig.
).
Adjustment of standard values (frost protection = 5 °C;
overheat protection = 35 °C) being done in temperature
menu T by setpoint
(refer to Operating Instructions).
5 Replacing the controller on its base
Proceed according to Fig. G.
6 Functional check
a) 60 seconds after the batteries supply power, an error
message
must appear
b) Switch on the boiler
c) The error message must disappear after 2 minutes at
the latest
d) Comfort mode
e) Select temperature menu T and adjust the temperature
setpoint
to 29 °C (refer to the Operating
Instructions)
f) The relay must be energized and thus the actuating
device activated within one minute. Flame symbol
will appear on the display. If that is not the case:
Check the boiler
The room temperature is possibly above 29 °C
g) Reset the setpoint temperature
to the initial value
(standard value 19 °C or individual setting)
h) Select the required operating mode
7 Reset
User-defined data:
Press the button behind the pin opening for at least one
second: this resets the user-specific settings and the
“Permanent-self-learning operating mode” as well as
display of flow temperature, outside temperature and
d.h.w. setpoint to their default values (the heating engineer
settings will not be changed). The clock starts at 12:00.
During the reset time, all sections of the display light up,
enabling them to be checked.
All user-defined data plus the heating engineer
settings:
Press the button behind the pin opening together with the
warmer and colder buttons for at least one second.
After this reset, the factory settings will be reloaded (also
refer to section “Factory settings“ in the operating
instructions).
Caution: If the controller is removed from its base for
more than 30 seconds, an error message will
appear on the display.
When sliding the controller back to its base,
the error message must disappear after
2 minutes at the latest.
Without inserted batteries, reset functions
correctly for a maximum of 15 seconds only
after removing REV23M from its base.
8 Notes
REA23 is an electric weekly programmable room
temperature controller.
The controller conforms to “Software Class A” and is for
use in “normal” pollution situation.
If the reference room is equipped with thermostatic
radiator valves, they must be set to their fully open
position
The remote operation contact T1 / T2 must be wired
separately using a separate screened cable
Ensure that the local regulations for electrical
installations are complied with
REA23M can only be used in connection with an
OpenTherm Plus-compatible boiler.
Mise en service
1 Montage
Retirez l'appareil de son socle, procédez comme indiqué
figure A. Pour le montage, référez-vous aux figures B et C
(voir également les instructions de montage)
2 Vérifier le câblage
Les raccordements sont indiqués dans le chapitre
"Schéma de raccordement". Voir aussi figures D et E.
Remarque : ne pas utiliser de fils tressés, uniquement des
fils ronds ou des fils avec cosses.
3 Retirer la bande isolante
Dès que la bande isolante noire est retirée du contact des
piles, l'appareil se met en marche. Voir aussi figure F.
Si l'écran reste vide, vérifier que les piles sont en place et
fonctionnent.
4 Configuration
4.1 Accès au niveau "Chauffagiste"
En appuyant simultanément sur les touches "plus chaud"
et "plus froid" et en tournant le bouton d'abord dans le sens
contraire des aiguilles d'une montre, et ensuite dans le
sens des aiguilles d'une montre, l'appareil libère l'accès au
niveau chauffagiste. Voir aussi figure H.
4.2 Fonctions diverses
4.2.1 Calibrer la sonde
Dès l'entrée au niveau Chauffagiste, le symbole CAL
clignote. En appuyant sur le bouton OK la température
actuelle clignote et peut être réajustée en tournant le
bouton de réglage de ± 2 °C max. Valider l'entrée en
appuyant sur le bouton OK (voir aussi figure
).
4.2.2 Limitation du point de consigne
2 possibilités de réglage
5

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Siemens-REA23M

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens REA23M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens REA23M in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,66 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Siemens REA23M

Siemens REA23M Gebruiksaanwijzing - Nederlands - 2 pagina's

Siemens REA23M Gebruiksaanwijzing - Deutsch - 2 pagina's

Siemens REA23M Gebruiksaanwijzing - English - 2 pagina's

Siemens REA23M Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info