521719
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Symbole
Absence
Special day
2 Comfort
periods
“Time” menu Heating active
Setpoint
comfort
3 Comfort
periods
T
“Temperature
menu
Cooling active
Setpoint
economy
Current weekday
“Comfort
period“ menu
Automatic
operation
Setpoint
protective temp.
Working-day group
“Absence”
menu
Continuously
comfort mode
Setpoint remote
operation
Weekend group
Battery
change
Continuously
economy mode
Setpoint
absence
Entire week
Commissioning and quick start
Remote
operation
Frost- or / over-
heating protection
1 Comfort
period
Time schedule
Functions of
the ESC-button, the setting knob and the OK-button
ESC-button
ESC
Press the ESC-button to return
to the menu level previously
activated or to leave the menu
level in a number of steps until
you reach the initial display
(the settings currently displayed
will be accepted).
+
ESC OK
OK-button:
OK
You access the menu level
You activate the menu
You save the inputs
You switch to the next
menu item
You accept the menu item
1. Remove controller from its base and open cover
of the battery compartment.
2. Remove the black battery transit tab. The
controller will switch itself on.
3. Close the battery compartment and replace
the controller.
Selecting the operating mode
Setting knob:
Setting knob is operative in menu levels only !
You go from one menu to the next
You change the setting variables (temperature in increments
of 0.2 °C, time in increments of hours and minutes)
You select predefined functions
The operating mode selector enables you
to select 5 different operating modes:
Setting the time of day and the weekday
Adjustable in operating modes , , and
Automatic operation with a maximum of
3 comfort periods (heating / cooling periods)
Continuously comfort mode
Continuously economy mode
Continuously frost-/ overheating protection mode
Special day with one comfort period
Changing temporarily the current
setpoint temperature
OK
OK
h
OK
h
OK
ESC
If no button is pressed for 20 seconds, the setting
displayed will be accepted and the initial display
will appear again.
1. OK-button: You access the menu level;
the clock flashes.
2. OK-button: You accept the menu;
the hours flash.
3. Setting knob: Set the current hour.
4. OK-button: You save the input;
the minutes flash.
5. Setting knob: Set the current minute.
6. OK-button: You save the input;
the weekday flashes.
7. Setting knob: Select the current weekday.
8. Press the ESC-button to return to the menu level:
the T menu flashes
(change not necessarily required;
press the ESC-button again to return
to the initial display).
° C
The change is
maintained until
the next
switching point is
reached!
Changing temperatures long-term
Adjustable in operating modes , , and
1. When pressing the or button for the
first time, the currently valid setpoint temperature
will be displayed. It can be readjusted in
increments of 0.2 °C (max. +/-4 °C).
2. After 3 seconds, the initial display will
automatically appear again.
Changing temporarily the
temperature setpoint (savings tip)
OK
OK
OK
° C
OK
OK
° C
OK
OK
° C
OK
OK
° C
ESC
ESC
If no button is pressed for 20 seconds, the setting
displayed will be accepted and the initial display
will appear again.
1. OK-button: You access the menu level the clock
flashes.
2. Setting knob: Clockwise to the T menu.
3. OK-button: You accept the menu;
symbol
flashes.
4. OK-button: You accept ; the setpoint flashes.
5. Setting knob: Set the comfort temperature
6. OK-button: You save the input;
symbol
flashes.
7. OK-button: You accept
; the setpoint flashes.
8. Setting knob: Set the economy temperature.
9. OK-button: You save the input; symbol
flashes.
10. OK-button: You accept
; the setpoint flashes.
11. Setting knob: Set the frost protection
temperature.
12. OK-button: You save the input; symbol
flashes.
13. OK-button: You accept
; the setpoint
flashes.
14. Setting knob: Set the temperature setpoint while
remote operation is active.
15. Press the ESC-button to return to the menu level:
The comfort periods
menu
flashes
(Change not necessarily required;
press the ESC-button again to return
to the initial display.)
In operating modes and , this
button can be pressed to make a manual
change from comfort to economy mode,
or vice versa. The change will
automatically be cancelled when
reaching the next switching point or when
selecting another operating mode.
Siemens / Building Technologies / HVAC Products B2216de 15.02.2007
en
Operating Instructions
REA23…
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Siemens-REA23M

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Siemens REA23M bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Siemens REA23M in de taal/talen: Engels als bijlage per email.

De handleiding is 0,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Siemens REA23M

Siemens REA23M Installatiehandleiding - Nederlands - 22 pagina's

Siemens REA23M Gebruiksaanwijzing - Nederlands - 2 pagina's

Siemens REA23M Installatiehandleiding - Deutsch - 22 pagina's

Siemens REA23M Gebruiksaanwijzing - Deutsch - 2 pagina's

Siemens REA23M Installatiehandleiding - English, Français - 22 pagina's

Siemens REA23M Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info