66383
36
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
34
HDMI connection
The HDMI connection (High De niton Multimedia Interface) allows dig-
ital picture and audio transmission via a connecting cable, e.g. from DVD
players. The digital picture and sound data are transmitted without data
compression and therefore lose none of their quality. No analogue/digital
conversion is necessary in the connected equipment which also led to
losses in quality.
DVI signals can be also be reproduced by the HDMI connection using a
DVI/HDMI adapter cable. This is possible because HDMI is based on DVI
and is downward compatible. That means that the digital video signals
are transmitted via HDMI. In addition both use the same copy protection
method HDCP.
Connect the DVD player or other audiovisual equipment with an HDMI
cable (type A, 19-pin) to the EXT 5 socket of the TV set. Log in the EXT 5
connection in the connection wizard (“TV menu” – “Connections” – “AV
setup”).
Select the HDMI connection in the AV selection.
Call AV selection.
External sources
VIDEO
EXT1
EXT2
EXT3
EXT4
EXT5
PC IN
Select EXT 5 with  and call up with OK.
Start playback on the connected device with HDMI connection.
The best possible formats for picture and sound are detected and set
automatically.
No sound is transmitted when a DVI/HDMI adapter cable is used for
transmission. You can feed in the appropriate analogue sound via the
audio input sockets “AUDIO IN L/R” on the TV set. The sound is played
over the TV loudspeakers.
If you have connected a digital external audio ampli er, you can select
the digital audio signal in the connection wizard (“TV menu - Connec-
tions - AV setup”) and assign it to the EXT 5 socket. You do the other
settings for the audio ampli er as described for the digital ampli er on
page 33. The digital audio signal of the DVI audio source is fed in at the
“AUDIO DIGITAL IN” socket on the TV. The digital audio signal from the
TV “AUDIO DIGITAL OUT” is fed to the ampli er.
PC connection
You can connect a PC or a Set Top Box (STB) and therefore use the TV
screen as an output device.
Connect the PC/STB with a VGA cable to the PC IN socket on the TV.
When connecting to a PC you set one of the following screen resolutions
on your PC rst. 800x600 60Hz (SVGA) or 1024x768 60Hz (XGA).
When a Set Top Box is connected you set the following screen resolu-
tions according to the possibilities of the Set Top Box:
698x576i (PAL), 698x480i (NTSC) .
720x480i, 720x 576i (SDTV - standard modes in STB).
1280x720p, 1920x1080i (HDTV modes).
Select the PC IN connection in the AV selection.
Call “PC IN”-connection, or with
PC
call AV selection.
External sources
VIDEO
EXT1
EXT2
EXT3
EXT4
EXT5
PC IN
Select PC IN with  and call up with OK.
Start the connected device.
Set geometry
Call the TV menu with the MENU button, select “Geometry” with
and set:
If the picture is not positioned correctly you can move the picture hori-
zontally and vertically here so that it lls the whole screen. You can also
set the “Phase position” so that the picture appears in the best possible
quality.
Set colour standard
Call the Picture menu with the
button. Select “Colour standard”
with and select.
The colour standard for a connected PC is “RGB”.
In Set Top Boxes you usually set “Ycc” as a colour standard. Other
formats such as “Ypp” or “RGB” can also be output. Please consult the
manual of the connected device.
If the wrong standard is selected, you will recognise this from the wrong
colours in the display.
Operating additional equipment
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sharp LC-32GD7 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sharp LC-32GD7 in de taal/talen: Engels als bijlage per email.

De handleiding is 6,4 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info