759014
6
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
- 6 - 03/2020
Copyright © 2020, Fast ČR, a.s.
Overheating protection
The appliance is equipped with overheating protection. In the event that there
is arisk of it overheating (you placed an empty pot or pan on the hotplate), the
appliance will beep and turn off automatically.
Note:
For safety reasons, the cooktop will turn off automatically after two hours
of operation if you do not press any button or adjust the settings.
CLEANING AND MAINTENANCE
Clean the appliance after every use. Makes sure that dried on food or other residues
do not accumulate on it. Before cleaning it, always turn off the appliance using the
On/Off button B12, disconnect the power cord from the power socket and allow the
appliance to cool down completely.
To clean the hotplate A2 and the surface around it, use asoft, lightly dampened
textile. Then wipe the hotplate A2 dry. In the event of greater soiling, use asmall
amount of neutral kitchen detergent. Remove any remaining detergent using
aclean, lightly dampened cloth. Then thoroughly wipe the cleaned surface until dry.
Do not use steel wool, solvents, cleaning products with an abrasive effect, etc. to
clean the appliance. Otherwise the surface coat of the appliance may be damaged.
Warning:
To prevent the risk of injury by electrical shock, do not submerge
the appliance, power cord or power plug in water or any another
liquid.
Storage
When not using the appliance for an extended period of time, disconnect the power
plug from the power socket, allow the appliance to cool down and clean it according
to the instructions provided above. Before storing it, check that the appliance is
clean and dry. Store the appliance in adry, clean and well-ventilated location not
exposed to extreme temperatures and out of children'sreach.
Error messages
Error code Cause Solution
E0 There is no pot
or pan on the
hotplate A2, or you
placed unsuitable
cookware on it.
Use suitable cookware – more in section
"Induction and selecting suitable
cookware".
E1 or E2 Heat sensor error. Stop using the appliance, disconnect the
power plug from the power socket and
contact an authorised service centre.
E3 or E4 The voltage in the
power socket to
which the cooktop
is connected is too
high or too low.
Insert the power plug into apower socket
with avoltage of 220 – 240 V~.
E5 Overheating Allow the cooktop to cool down. Then put it
into operation again.
E6 The heat fuse was
activated, the
cooktop turned off
due to overheating.
Allow the cooktop to cool down. Check that
the air inlet A1 and the fan and the air outlet
A3 are free and unobstructed. If the problem
persists, stop using the appliance, disconnect
the power plug from the power socket and
contact an authorised service centre.
Note:
If the problem persists, stop using the appliance, disconnect the power
plug from the power socket and contact an authorised service centre.
TECHNICAL SPECIFICATIONS
Rated voltage range ....................................................................................................... 220 – 240 V~
Rated frequency......................................................................................................................50 / 60 Hz
Rated power input .................................................................................................................... 2,000 W
Hotplate power settings ..............................................................................................200 – 2,000 W
Hotplate temperature settings .......................................................................................60 – 240°C
Operating time settings ..........................................................................................1 – 180 minutes.
Safety class for electrical shock protection: Class II – Electrical shock protection
is provided by double or heavy-duty insulation.
We reserve the right to change the text and technical specifications
INSTRUCTIONS AND INFORMATION REGARDING THE
DISPOSAL OF USED PACKAGING MATERIALS
Dispose of used packaging material at asite designated for waste in your municipality.
DISPOSAL OF USED ELECTRICAL AND ELECTRONIC
EQUIPMENT
This symbol on products or original documents means that used
electric or electronic products must not be added to ordinary
municipal waste. For proper disposal, renewal and recycling, hand
over these products to determined collection points. Alternatively, in
some European Union states or other European countries you may
return your appliances to the local retailer when buying an equivalent
new appliance.
Correct disposal of this product helps save valuable natural resources
and prevents potential negative effects on the environment and human health, which
could result from improper waste disposal. Ask your local authorities or collection
facility for more details.
In accordance with national regulations penalties may be imposed for the incorrect
disposal of this type of waste.
For business entities in European Union states
If you want to dispose of electric or electronic devices, ask your retailer or supplier for
the necessary information.
Disposal in other countries outside the European Union.
This symbol is valid in the European Union. If you wish to dispose of this product,
request the necessary information about the correct disposal method from the local
council or from your retailer.
This product meets all the basic requirements of EU directives related to
it.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SCP 3701 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SCP 3701 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info