759014
5
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
- 5 - 03/2020
Copyright © 2020, Fast ČR, a.s.
EN Single Induction
Cooktop UltraFlat
User'smanual
Prior to using this appliance, please read the user'smanual thoroughly, even in cases,
when one has already familiarised themselves with previous use of similar types of
appliances. Only use the appliance in the manner described in this user’smanual.
Keep this user'smanual in asafe place where it can be easily retrieved for future use.
We recommend saving the original cardboard box, packaging material, purchase
receipt and responsibility statement of the vendor or warranty card for at least the
duration of the legal liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in the original box
from the manufacturer.
DESCRIPTION OF THE APPLIANCE
A1 Air inlet (along the sides of the
appliance)
A2 Hotplate
A3 Fan and air outlet (on the underside
of the appliance)
A4 Control panel with display
DESCRIPTION OF THE CONTROL PANEL
B1 Timer indicator light
B2 Child lock indicator light
B3 Display – shows the hotplate power
level, set temperature, automatic
shut-off time or error message
codes. If the cooktop is in the stand-
by mode, the display will show
"OFF".
B4 Temperature indicator light
B5 Power level indicator light
B6 Child lock button
B7 Timer button
B8 Minus (–) button
B9 Slider for quick setting of power
level / temperature
B10 Plus (+) button
B11 Function selection button
B12 On/Off button
Before first use
Before first use, take the appliance and its accessories out of the packaging material
and remove all promotional labels and stickers. Check that neither the appliance nor
any of its parts is damaged.
Wipe the surface of the appliance with aclean, lightly dampened cloth. Then wipe
it dry.
Induction and selecting suitable cookware
Underneath the hotplate there is an induction coil that, when turned on, creates
avariable electromagnetic field. The induction current generated by this field starts
heating the bottom of the pot or pan that is placed on the hotplate. To ensure
proper operation, it is important that the cookware is ferromagnetic. This property
can be verified using asmall magnet placed against the bottom of the pot or pan.
If there is an attraction between the magnet and the bottom of the pot or pan then
the cookware is ferromagnetic and hence suitable for use on an induction hotplate.
This includes, for example, cast iron, steel, enamelled and stainless steel cookware
with aferromagnetic bottom.
We recommend that the base of the cookware is flat and straight. The minimum
diameter of the base is 12 cm, the maximum diameter may be up to 2 cm past the
edge of the hotplate. The induction hotplate automatically adapts to the size of the
used pot or pan.
If, on the other hand, there is no attraction between the magnet and the bottom of
the pot or pan then the cookware is not suitable for use on an induction hotplate.
As arule, this includes cookware made from copper, pure stainless steel, aluminium,
glass, wood, ceramics, stone, etc.
Note:
When unsuitable cookware is used or if the hotplate detects that there is
no cookware on it, then it will turn off automatically. This is anormal safety
feature that prevents damaging the appliance.
RADIO WAVE INTERFERENCE
The use of the induction cooktop may cause interference to your radio, television
or similar receivers.
If this occurs, we recommend to:
- redirect the radio or television antenna;
- move the cooktop farther away from the radio, television or receiver;
- insert the power plug into adifferent power socket with an independent circuit.
Operating the appliance
Place the appliance on akitchen countertop or on atable within reach of apower
socket. At the same time, make sure that all safety instructions are followed.
Make sure that there are no foreign objects located on the hotplate A2 and that
its surface is clean.
Fully unwind the power cord and connect it to apower socket.
Note:
Since the appliance heats up during operation, the power cord must be
located in such away that it is not touching the surface of the appliance.
Note:
Plug the appliance into aseparate power socket with an independent
circuit breaker. Necessary circuit breaker – 16A.
Turning on the cooktop
To turn on the cooktop, press button B12. The display B3 will show "ON".
Place apot or pan on the hotplate A2.
Press the function selection button B11. The appliance automatically detects the
pot or pan. If the used cookware is suitable, the appliance will start automatically
at the preset power level. The display B3 will show the preset power value and the
fan A3 will start.
If the used cookware is not suitable, the appliance will not start. The error message
E0 will appear on the display B3 and the appliance will beep. After awhile the
appliance will automatically switch to the stand-by mode.
If you take the cookware off the hotplate A2, the display B3 will show the
error message E0 and the appliance will beep. After a while the appliance will
automatically switch to the stand-by mode. The display B3 will show "H" or "OFF".
Turning off the cooktop
When not using the cooktop, press button B12 to turn the cooktop off. The display
B3 will show "H" or "OFF". The cooktop will switch to the stand-by mode. If the
temperature of hotplate A2 is higher than 80°C, then display B3 will show "H" after
being turned off. As soon as the temperature of the hotplate A2 falls below 80°C,
the "H" will disappear from the display B3.
Disconnect the power plug from the power socket.
Note:
The fan A3 will run for acertain time after the cooktop is turned off so that
it cools down faster. Do not pull the power plug out of the power socked
until the fan A3 turns off completely.
Note:
When first turned on, there may be light smoke emitted. This is an entirely
normal event, which will disappear after afew minutes.
Setting the power level
When the cooktop is turned on for the first time, it will start at the preset power level.
Press the function selection button B11 until the power level indicator light B5 is lit.
To set the power level, use buttons – / + or the slider B9. The power level can be set
in the range 200 W– 2,000 W.
Note:
Prior to setting the power level, always ensure that the power level
indicator light B5 is lit. If it is not, first press the function selection button
B11.
Setting the temperature
When the cooktop is turned on for the first time, the preset temperature is set to
"120°C".
Press the function selection button B11 until the temperature indicator light B4 is lit.
To set the temperature, use buttons – / + or the slider B9. You can set the temperature
in the range from 60 to 240°C.
Setting the power level and automatic shut-off
Press the function selection button B11 until the power level indicator light B5 is lit.
Then press the timer button B7. The display B3 will show "0:00". Using the buttons
– / +, set the time after which the cooktop will automatically turn off, in the interval
from 1 minute to 3 hours. The automatic shut-off is set in one-minute increments.
The set automatic shut-off time will start flashing on the display B3 for approximately
5 seconds and then the appliance will automatically switch to the power level
setting. The default power will appear on the display B3. To set the power level, use
buttons – / + or the slider B9.
The set time will start counting down on the display B3.
During the set time, the set power level can be set using buttons – / +, or the slider
B12.
When the set time elapses, the cooktop will beep and automatically switch to the
stand-by mode. The display B3 will show "H" or "OFF".
Setting the temperature and automatic shut-off
Press the function selection button B11 until the temperature indicator light B4 is
lit. Then press the timer button B7. The display B3 will show "0:00". Using the buttons
– / +, set the time after which the cooktop will automatically turn off, in the interval
from 1 minute to 3 hours. The automatic shut-off is set in one-minute increments.
The set automatic shut-off time will start flashing on the display B3 for
approximately 5 seconds and then the appliance will automatically switch to the
temperature setting. "120°C" will appear on the display B3.
To set the temperature, use buttons – / + or the slider B9.
The set time will start counting down on the display B3. The countdown time and
the set temperature will be intermittently shown on the display B3.
During the set time, the set temperature can be set using buttons – / +, or the slider
B12.
When the set time elapses, the cooktop will beep and automatically switch to the
stand-by mode. The display B3 will show "H" or "OFF".
Child safety lock
The appliance is equipped with achild lock function that enables the control panel
to be locked to prevent unwanted changes to the settings.
To activate the child lock function, hold down button B6 for awhile. Indicator light
B2 will be lit and the control buttons will be disabled.
To deactivate the child lock function, hold down button B6 for awhile. The indicator
light B2 will turn off.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sencor SCP 3701 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sencor SCP 3701 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info