528684
10
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
Wire
d Measurement using Flash Unit
with Synchro Cord
Wired measurement is recommendable when you measure the flash light
from the subject position, or when the meter fails to register flash light in
wireless (cordless) measurement; for example, close to a fluorescent lamp,
or in high ambient condition, and so forth.
(2) Set the film speed (ISO) and shutter
speed (T) as shown in the
paragraphs for “Preparing the Meter
for Operation”.
(3) Connect the synchro cord to the
synchro terminal of meter and the
flash unit.
(4) Point the Lumisphare accurately
toward the camera from the subject
position, and press the measuring
switch to fire the flash.
(5) The appropriate F-stop value is
displayed on the meter (Fig. 18).
For repeat measurement, press
the measuring switch again.
< NOTE >
The notes for wireless measurement
are also applicable to wired
measurement.
16
Cumulative Measurement using
Electronic Flash Unit
When you are unable to obtain sufficient illumination with a single flash or
you try for special effects using a multiple exposure technique, there may be
cases that you wish to use your flash repeatedly. In such cases, you should
set the meter to the cumulative measurement mode. Cumulative
measurement is usable for both wireless (cordless) and wired
measurements for flash light.
(1) Before pressing the measuring
switch, set the cumulative
measurement mode by pressing the
multi-measurement key. The symbol
of MO is indicated on the display
(Fig. 19).
(2) Measure the flash light as shown in
the paragraphs for “Wireless
(cordless) Measurement using
Electronic Flash Unit” or “Wired
Measurement using Flash Unit with
Synchro Cord”.
(3) The reading and the number of
cumulative frequency are displayed
automatically each time the flash is
fired (Fig. 20). The maximum
possible cumulative flashes is 9. If
the flash is fired 10 or more times,
the number of cumulative flashes is
replaced by E mark (Error) and no
further reading is possible (Fig. 21).
(4) To repeat the cumulative
measurement, press the multi
measurement key once to release
the current reading. And press the
multi key again to prepare the fresh
reading.
In case of wireless (cordless)
measurement, pressing the
measuring switch can also release
the current reading.
<NOTE>
Memory display function (refer to
page 20) is not usable if the meter is
used in the cumulative
measurement mode.
17
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Sekonic L-718 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Sekonic L-718 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info