782177
31
Verklein
Vergroot
Pagina terug
1/164
Pagina verder
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 31
Cleaning
-
ing free of dirt and dust as far as possible. Wipe the
equipment with a clean cloth or blow it with com-
pressed air at low pressure.
-

       
and some soft soap. Do not use cleaning agents or
solvents; these could attack the plastic parts of the
equipment. Ensure that no water can seep into the
device. The ingress of water into an electric tool i
creases the risk of an electric shock.
Maintenance
There are no parts inside the equipment which re-
quire additional maintenance.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
       -


12. Storage
    
and frost-proof place that is inaccessible to children.
The optimum storage temperature is between 5 and

Cover the electrical tool in order to protect it from dust
and moisture.
Cover the electrical tool in order to protect it from dust
and moisture.
Store the operating manual with the electrical tool.
13. Electrical Connection

to work. The connection complies with the relevant
VDE and DIN regulations. The customer-side mains

regulations.
Important information
In the event of an overloading the motor will switch
󰀨    
motor can be switched back on again.
Defective electric connection lines
Often, insulation damages occur on electrical con-
nection lines.
    
reach, on the hook (ad) provided for this purpose
on the side of the saw (Fig. AB)
10.2 Angled cuts (Fig J + Fig. AE)
In order to execute angled cuts parallel to the saw
band, it is possible to tilt the saw bench (7) forwards
from 0° - 45°.
Release the locking handle (k).
Tilt saw bench (7) forwards, until the desired angle
is set on the degree scale (o).
Retighten the locking handle (k).
-
nal fence (5) must be positioned on the downward
facing side to the right of the saw band in the work-
ing direction (if the workpiece width allows this), in
order to secure the workpiece against slipping.
Perform the cut as described under 10.1.
10.3 Freehand cuts (Fig. AF)
One of the most important features of a band saw is
the ease with which it can cut curves and radii.
Lower the saw band guide (4) onto the workpiece.
(8.9)
Switch on the saw.


      
with a low advancing speed, so that the saw band
can follow the desired line.
 



󰀨

10.4 Executing cuts with the transverse cutting
gauge (Fig. AG + Fig. AC) (optional)
Set transverse cutting gauge (14) to the desired an-
gle (see 8.10)
Perform the cut as described under 10.1.
11. Cleaning and maintenance
Warning! Prior to any adjustment, maintenance
or service work disconnect the mains power
plug!
General maintenance measures
󰀨
using a cloth. In order to extend the service life of the

motor.
When cleaning the plastic do not use corrosive prod-
uct.
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Scheppach HBS400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Scheppach HBS400 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Pools als bijlage per email.

De handleiding is 7,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info