699607
3
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
SECURITY SYSTEM...........................................................................................
USER ..................................................................................................................
TELEPHONE NUMBER ......................................................................................
ADDRESS...........................................................................................................
REMARKS...........................................................................................................
............................................................................................................................
The mode of operation of the alarm control panel is defined by the security system
parameters. Changing these parameters makes it possible to adapt the panel operation to
individual needs of the protected site. The initial settings, or the so-called „defaults”, are
indicated in the description of each service function.
The service functions allow changes in the settings of particular system parameters to be
made by means of the keypad. Such changes can only be made when the control panel is
not armed and when it signals no alarm.
The parameters can also be changed remotely by means of the computer and the DLOAD10
program. In order to do so, the „downloading” (DWNL) function of the control panel must be
used (see description in the CA-5
I
NSTALLER
M
ANUAL
). The program makes it possible to
assign names to the users and zones. Such names will be displayed when viewing the
memory log in the LCD keypad or on the computer screen.
ACTIVATION OF SERVICE MODE
To change any parameter by means of the service function, activate the service mode in the
control panel ([SERVICE CODE] [#]), enter the number of the corresponding service function
and press the [#] key. The numbers and descriptions of functions are included hereunder in
this manual.
It is also possible to call the service mode without entering the service code. With this aim
you should:
disconnect the control panel power supply (first the mains, then the battery),
put a jumper on the RESET pins on the control panel mainboard,
reconnect the control panel power supply: first the battery, then the mains – the LED
keypad will start blinking with all its LEDs and generating short beeps; the LCD keypad will
display a “No CLK signal” massage and generate short beeps,
remove the jumper – the keypads will confirm the panel entering the service mode by four
short and one long beeps; in the LED keypad, the [
PROGRAM
] diode will light up; in the
LCD keypad, the service mode menu will display.
This procedure is colloquially known as the entry „from pins” (see: description of function FS 9).
PROGRAMMING WITH LED KEYPAD
Having called the service function, check the current setup or enter new data. The way of
data entry is described in subsequent sections. Press [#] in order to memorize the new
setting of a parameter, or press [
*
] and hold down until you hear two long beeps, or,
alternatively, press in turn [
*
][#] to quit the function without making any changes.
Checking the setup of numeric parameters (which require numbers to be entered) is possible
by double pressing the [
*
] key. Displayed in the binary system on the LEDs (2–5) are
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel CA-5

Satel CA-5 Aanvulling / aanpassing - Deutsch - 20 pagina's

Satel CA-5 Gebruiksaanwijzing - Deutsch - 24 pagina's

Satel CA-5 Installatiehandleiding - Deutsch - 28 pagina's

Satel CA-5 Gebruiksaanwijzing - English - 24 pagina's

Satel CA-5 Snelstart handleiding - English - 12 pagina's

Satel CA-5 Installatiehandleiding - English - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info