699607
18
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
16 Settings list CA-5
FS 72 – AC LOSS REPORTING DELAY
|__|__|__|#
program from 0 do 255 minutes
default|0|1|0|#
Note: Entering the „0” value will block sending the „AC loss” event code, while during review
of the current troubles, information on such a failure will be displayed on the LEDs.
FS 73 – TELEPHONE LINE VOLTAGE LOSS REPORTING DELAY
|__|__|__|#
program from 0 to 99 minutes default|0|0|0|#
Note: Entering the 0 value will block reporting troubles of the „telephone line voltage loss”
type.
7. RESTARTS
Performance of the functions FS 74 and FS 75 will restore default values of the parameter
settings. The special way these functions (request to confirm execution of the function with
the key [1]) are executed protects the settings against an accidental deletion.
FS 74 – CLEAR SETTINGS
After calling the function, the LEDs 2 to 4 will light up. Press the [1] key to restore the default
settings. The function also resets the names of users and zones.
FS 75 – CLEAR CODES
After calling the function, the LEDs 1, 3, 4 and 5 will light up. Press the [1] key to restore the
default settings.
FS 76 – CLEAR MONITORING CODES AND IDENTIFIER
All the codes are pre-programmed according to the default settings (see: FS 56 to FS 68).
The purpose of the function is to quicken the process of programming the selected
monitoring codes. An earlier activation of the function makes unnecessary the individual
deletion of the codes not sent to the station. The deletion consists in programming the zero
code.
After calling the function, the LEDs 1, 2, 4 and 5 will light up. Press the [1] key to reset all the
control panel monitoring codes and identifier.
FS 77 – LOCAL DOWNLOADING (local communication)
Note: All the changes introduced in the process of communication become valid as soon as
they are uploaded to the panel, except for some parameters (zone sensitivity, zone
types, telephone messaging options), which become valid after the communication is
ended or a full minute is counted by the panel (after the end of uploading).
FS 78 – RS-232 DOWNLOADING
Calling the function starts data exchange between the panel and the computer via the
RS-232 port.
Note:
To connect the ports of the control panel and the computer, use the special cable of
SATEL make, which is designed for conversion of the TTL (0V, +5V) standard signal into
the RS-232 (-12 V, +12 V) standard. The cable enables two-way data transmission.
In case of laminate version 4.0 and up (PCB with RJ socket), the cable with DB9FC/RJ
designation is necessary. In case of an earlier version of laminate, the cable with
DB9FC/PIN3 designation is needed.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Satel CA-5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Satel CA-5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Satel CA-5

Satel CA-5 Aanvulling / aanpassing - Deutsch - 20 pagina's

Satel CA-5 Gebruiksaanwijzing - Deutsch - 24 pagina's

Satel CA-5 Installatiehandleiding - Deutsch - 28 pagina's

Satel CA-5 Gebruiksaanwijzing - English - 24 pagina's

Satel CA-5 Snelstart handleiding - English - 12 pagina's

Satel CA-5 Installatiehandleiding - English - 27 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info