767077
1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
ABC
A
B
E
F
G
C
DB
C
E
A
F
D
2
SCREW HOLES
FOR CATCH
1B PEEL OFF
3
SCREW HOLES
FOR LOCK
1A PEEL OFF
FOLD
HS025
ProGrade
HS132
Core
2
SCREW HOLES
FOR CATCH
FOLD
2
SCREW HOLES
FOR CATCH
1B PEEL OFF
3
SCREW HOLES
FOR LOCK
1A PEEL OFF
FOLD
For adhesive mount:
mark line
for catch
piece as shown
with red line
mark line
for lock
piece as shown
with red line
adhere lock as shown
3
SCREW HOLES
FOR LOCK
1A PEEL OFF
Green = Locked
Red = Unlocked
1
Catch
Lock
Lock/Unlock button
SecureTechTM lock indicator
Magnetic key
Screws (4 per lock)
Installation template (1 per lock)
©2013 Cosco Management, Inc. All Rights Reserved. Todos derechos reservados.
www.djgusa.com (800) 544-1108 www.safety1st.com Made in CHINA. Hecho en CHINA.
Styles and colors may vary. Los estilos y los colores pueden variar.
Distributed by (distribuido por) Dorel Juvenile Group, Inc., 2525 State St., Columbus, IN 47201-7494
Dorel Distribution Canada, 873 Hodge, St. Laurent, QC H4N 2B1
09/13/13 4358-5306B
Complete Magnetic Locking System HS129, HS130, HS131, HS132, HS133
User Guide
Parts & Features
CAUTION:
This product is only a deterrent. It is not a substitute for proper adult supervision. DO NOT use this product if damaged or broken.
FOR INDOOR HOME USE ONLY.
WARNING:
ADULT INSTALLATION REQUIRED. KEEP SMALL PARTS AWAY FROM CHILDREN DURING INSTALLATION.
Keep magnetic key out of reach of children.
This product contains magnets. Swallowed magnets can stick together across intestines, causing serious infections
and death. Seek immediate medical attention if magnets are swallowed.
Do not use this product to guard against toxic and dangerous substances or sharp-edged or pointed objects. Such
materials should always be placed “high-up” or otherwise made completely inaccessible to children.
BEFORE YOU BEGIN:
Important Safety Information
Check for security after installation by tugging firmly on the door or
drawer. If the latch does not securely hold the door or drawer when
tugged, adjust the latch to obtain a secure connection.
Your child will eventually be able to defeat this product. To keep this
product effective for as long as possible, avoid letting children see
how you operate child safety devices. Watching you disengage a lock,
latch or cover could enable them to learn sooner how to defeat it.
Read all instructions before installing.
Keep these instructions for future use.
Remove all contents from packaging and discard box, and/or poly bags.
Do not return this product to the place of purchase. If any parts are
missing, email consumer@djgusa.com, call Consumer Relations at (800)
544-1108, or fax at (800) 207-8182. You can also visit our website at www.
safety1st.com. Have the model number ready (HS129, HS130, HS131, HS132,
HS133) and date code (manufacture date) located on product.
Tools needed: Hand drill or power drill, 7/64” drill bit, Phillips head
screwdriver & pencil (not provided).
Door/drawer geometry may prohibit use.
Avoid close proximity to metal hardware or metal objects stored in
cabinets when planning product placement, as they might make it difficult
to operate the magnetic key properly.
Remove adhesive bumper pads on your cabinet doors only if they interfere
with installation or operation of these locks.
1b
Determine Lock Placement
Cabinet Door and Drawer Types
There are many sizes, shapes and kinds of cabinet doors and drawer
fronts. To determine if our lock will work on your door/drawer follow
steps 1-8 below.
NOTE:
Doors with inset panels (Image A) may not have wide enough flat
surface.
Drawers with outer face panels
(Image B)
may not have enough room
to install this lock
.
When locks don’t fit at the top of the cabinet, they may fit at the side
(Image C).
Drawer with outer face panel
Inset frame Top or side
1 Open door/drawer and choose a
possible location to install the lock.
Mark how far down the side of the
door/drawer or how far over on the
top of the door/drawer the lock will
be located
(Figures 1a and 1b)
.
2 Close cabinet door/drawer and
mark your lock position on the
cabinet base
(Figures 2a and 2b)
.
3
Peel paper (labeled
1A
) off
template (Figure 3).
1a
Panel frame
2b
2
SCREW HOLES
FOR CATCH
1B
PEEL OFF
3
SCREW HOLES
FOR LOCK
FOLD
2
SCREW HOLES
FOR CATCH
1B
PEEL OFF
FOLD
1A
PEEL OFF
1B
PEEL OFF
2
SCREW HOLES
FOR CATCH
FOLD
2a
3
Inside
panel
G
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Safety 1st Complete Magnetic Locking System bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Safety 1st Complete Magnetic Locking System in de taal/talen: Engels, Spaans als bijlage per email.

De handleiding is 3,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info