390830
7
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
THANK YOU FOR BUYING A RYOBI PRODUCT.
To ensure your safety and satisfaction, carefully read
through this OWNER’S MANUAL and the SAFETY
INSTRUCTIONS before using the product.
INSTRUCTIONS FOR SAFE HANDLING
Make sure that the tool is only connected to the
voltage marked on the name plate.
Never use the tool if its cover or any bolts are missing.
If the cover or bolts have been removed, replace them
prior to use. Maintain all parts in good working order.
Always secure tools when working in elevated
positions.
Never touch the blade, grinding wheel or other
moving parts during use.
Never start a tool when its rotating component is in
contact with the work piece.
Never lay a tool down before its moving parts have
come to a complete stop.
ACCESSORIES: The use of accessories or
attachments other than those recommended in this
manual might present a hazard.
REPLACEMENT PARTS: When servicing use only
identical replacement parts.
ANGLE GRINDER SAFETY PRECAUTIONS
Check that the speed marked on the grinding wheel is
equal to or greater than the rated speed of the tool.
Ensure that the dimensions of the grinding wheel are
compatible with the tool and that the wheel fits
the spindle.
Grinding wheels must be stored in a dry place.
Grinding wheels must not be used for any operation
other than grinding.
Grinding wheels must be stored and handled with care
in accordance with the manufacturer’s instruction.
Inspect the grinding wheel before use to ensure that it is
not chipped or cracked. Chips or cracks can cause the
wheels to shatter, resulting in possible serious injury.
Ensure that the wheel is fitted in accordance with
this manual.
Ensure that the grinding wheel is correctly mounted
and tightened before use and run the tool at
no-load speed for 30 seconds in a safe position.
Stop immediately if there is considerable vibration or
if other defects are detected. If this condition occurs,
check the tool to determine the cause.
Do not use separate reducing bushings or adapters to
adapt large hole grinding wheels.
Check that the work piece is properly supported.
Use only grinding wheels approved by authorized
service centre
Ensure that sparks resulting from use do not create
a hazard e.g. do not hit people, or ignite flammable
substances.
Always use protective safety glasses and ear
protectors.
Use other personal protective equipment such as
gloves, apron and helmet when necessary.
Never place the tool on the floor or other surfaces
while it is running.
Grinding wheels continue to rotate after the tool is
switched off.
Never touch the wheel or place it on the floor or other
surfaces while it is rotating.
The flange and clamp nut must have same outer
diameter.
Do not remove the soft paper in the center of the
grinding wheel. (If the paper has been previously
removed, insert some soft paper or rubber between
grinding wheel and flange.)
Use the tool only for approved applications. Never
use coolants or water or use the tool as a fixed tool.
Grip the tool securely with both hands while operating.
SPECIFICATIONS
EAG-8011 EAG-8012
Grinding wheel 115 mm (4-1/2”) 125 mm (5")
Voltage* 230 V ~ 50 Hz 230 V ~ 50 Hz
Input 800 W 800 W
Spindle thread M14 M14
No load speed 11,000 min
-1
11,000 min
-1
Overall length 310 mm 310 mm
Net weight 2.35 kg 2.35 kg
* Be sure to check the nameplate on the product,
because the voltage is subject to change depending
on the area in which the product is to be used.
Maximum circumferential speed of grinding wheel:
4,800 m/min.
Example of calculation:
4,320 = 3.14 x 125 x 11,000 / 1,000
4,320: Circumferential speed of grinding wheel
125: Wheel diameter
11,000: No load speed of grinder
4
GB
English
F D E I P NL S DK N FIN GR H CZ RUS PL
RO
SLO TR
HR
EAG-8011-8012_20 lgs 10/08/05 11:19 Page 4
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ryobi eag 8012 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ryobi eag 8012 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 1,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info