-
Service call 52000 blijft terug komen, ook na herhaald aan en uit zetten
Gesteld op 29-8-2018 om 17:10 in forum Ricoh Aficio SG 3110DN Misbruik melden-
52000 Vertical motor error
Waardeer dit antwoord Misbruik melden
• The vertical encoder sensor signal is unstable.
• The vertical encoder sensor signal is missing.
• The vertical motor is not running.
• The vertical encoder wheel is stained or damaged.
• The vertical encoder wheel is damaged.
• The vertical encoder sensor is faulty.
• The harness between the vertical encoder board and CTL board is
broken, improperly connected, or has shorted.
• The vertical motor is faulty.
• The vertical motor timing belt is loose.
• The harness between the vertical motor and CTL board is broken or loose.
• A peripheral part (reading edge pressure roller or nozzle head cover) is
damaged.
• The transport belt is curled.
• The CTL board is faulty.
• The power supply unit is faulty.
• Replace the vertical encoder wheel.
• Replace the vertical encoder board.
• Replace the harness between the vertical encoder board and CTL board.
• Replace the vertical motor.
• Replace the timing belt between the vertical motor and transport belt.
• Replace the harness between the vertical motor and CTL board.
• Replace the damaged peripheral part.
• Replace the base feed unit*1.
• Replace the CTL board.
• Replace the power supply unit.
grandcherokee77@gmail.com Geantwoord op 28-9-2019 om 14:02
-
Kent u iemand die het antwoord hierop weet? Deel een link naar deze vraag via email, Twitter of Facebook.