613882
2
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
2 — Renusol ConSole · EN · 04/2011
INSERTION
Product Information
The ConSole assembly system is the ideal solution for installing PV modules
on flat roofs with pitch of up to 5° without roof penetration. Most commercially
available framed standard PV modules fit on the ConSole.
The ConSole is weighed down with ballast (gravel, paving slabs, etc.) in order to
resist the wind loads. The necessary weight of the ballast depends on the height
of the building, its location and condition of the ground and the wind and snow
loads.
Reference values for the necessary ballast are contained in "Preparing the
assembly – point 2." in the table on page 5 above.
The ConSole is made from 100% recycled chlorine-free polyethylene (HDPE).
The material of the ConSole satisfies the fire prevention measures of DIN 4102
class B2. The energy amortization time of the ConSole is shorter than one year.
A ConSole weighs 5 −7.2 kg depending on the type and can be stacked with up
to 40 ConSoles per pallet. The circular assembly edge will facilitate a fast
installation. Generously sized ventilation channels ensure efficient air circulation.
The boreholes on the ground of the ConSole are conducive for drainage.
We wish to point out that work must be carried out according to current safety
regulations (e.g., VBG37) in order to prevent accidents. Please carry out the
respective safety measures.
Warranty
Our warranty only applies if an original ConSole complete system is used.
In order to adjust the system optimally for the local conditions and to fulfil all
applicable regulations, we recommend an expert report be prepared if in any
doubt. The installation should be carried out by skilled and trained personnel.
If you have questions concerning training, please contact Renusol.
Installation instruction
Please read these installation instructions carefully before starting installation.
First, familiarize yourself with the system components. The ConSole can be
stored and used at temperatures of between -30° C and +50° C. We recommend
the ConSoles be assembled at plus temperatures. The roof area must in any case
be free of snow and ice.
During the installation and, in particular, while working on the roof, be sure to
observe the relevant health and safety provisions and please follow the current
rules and regulations.
Please also check the current version of our installation instructions on our
website at www.renusol.com. Here, you can also find instructions in other
languages, if required. The figures and texts in the installation instructions
correspond to current technology at the time of printing. We reserve the right
to make changes.
The installation instructions merely contain recommendations in accordance
with current technology and are based on the experience of how systems made
by Renusol can be installed. If any roof or object-specific characteristics are to be
considered, please, if necessary, involve specialists such as roofers or structural
engineers for the purposes of explanation.
The Renusol team wishes you a successful installation.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Renusol ConSole bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Renusol ConSole in de taal/talen: Engels als bijlage per email.

De handleiding is 1,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info