692203
58
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
58
19. Troubleshooting
Problem Possible solution
The 3D printer does not switch on. The
touchscreen display and printer light do
not turn on.
Check that the mains cable is connected properly.
Check the mains socket. Is it supplied with electricity?
You cannot establish a USB connection
with the 3D printer.
Check that the USB cable is connected.
Have you selected the correct USB port in the software?
Are the required drivers installed?
Disconnect and then reinsert the USB cable.
Switch the 3D printer off, and then switch it back on.
Restart your computer.
Use a different USB port on your computer.
Connect the 3D printer directly to a USB port on your computer. Do
not use a USB hub.
The printed object is defective.
Check the nozzle temperature settings. These must be suitable for
the lament material and printed object. Experiment with several
temperature settings.
Do not start printing until the nozzle has reached the required
temperature.
Decrease the distance between the print bed and nozzle (see “a)
Calibrating the print bed” on page 29).
When printing via your computer, avoid using other programs that
require a lot of computing power. Virus scanners and downloads can
affect the transfer of data to the 3D printer. Try printing the same model
via the SD card to check that the USB connection is not the cause of
the problem.
Remove excess lament from the nozzle before each print.
The ow of lament stops, or there is not
enough lament material.
Check the lament spool. It must be able to rotate easily.
Check whether the lament material has become trapped or wrapped
around the spool/spool holder.
Check that the lament was inserted correctly over the lament spool.
Check whether the nozzle temperature is too low for the lament
material.
Check whether the nozzle is blocked. If necessary, clean the nozzle
(see “b) Cleaning the nozzle” on page 56 for details).
58

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Renkforce RF100 XL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Renkforce RF100 XL in de taal/talen: Engels als bijlage per email.

De handleiding is 7,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Renkforce RF100 XL

Renkforce RF100 XL Gebruiksaanwijzing - Nederlands - 64 pagina's

Renkforce RF100 XL Gebruiksaanwijzing - Deutsch - 62 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info