805744
50
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
Installer level - #SECONDARY INSTAL.P menu
Parameter Adjustment range Description Factory
setting
Customer
setting
ADAPT ON Automatic adaptation of the heating curves
for each circuit with a room sensor with an
influence of >0.
ON
OFF The heating curves can only be modified
manually.
PRIORITY DHW(6) TOTAL Interruption of pool heating and reheating
during domestic hot water production.
TOTAL
SLIDING Domestic hot water production and heating
on the valve circuits if the available output
is sufficient and the hydraulic connection
allows.
NO Heating and domestic hot water production
in parallel if the hydraulic connection allows.
a Risk of overheating in the direct circuit.
LEG PROTEC The anti legionella function acts to prevent
the development of legionella in the dhw
tank, these bacteria are responsible for
legionellosis.
OFF
OFF Antilegionella function not activated
DAILY The tank is overheated every day from
4:00 o’clock to 5:00 o’clock
WEEKLY The tank is overheated every Saturday from
4:00 o’clock to 5:00 o’clock
(1) The parameter is only displayed if INSTALLATION parameter is set to EXTENDED
(2) The parameter can be set to the heating curve by pressing key f
(3) The parameter is only displayed if SCREED DRYING is other than OFF
(4) According to the configuration
(5) The parameter is only displayed if IN 0-10V is set to ON.
(6) If a reversal valve is connected, DHW priority will always be total regardless of the setting.
Installer level - Menu #SOLAR(1)
Parameter Adjustment range Description Factory
setting
Customer
setting
DEC.SOLAR DHW 0 to 30 °C Maximum drop in the DHW set point when
the solar pump is running at 100%
5°C
REFERENCE DT 10 to 20 °C Temperature difference that the solar
pump tries to maintain between the solar
DHW sensor and the panel
10°C
MAX.T.COLLECTOR 100 to 125 °C Temperature of the panel above which
the solar pump starts up.
The pump does not operate if the
temperature of the solar tank is higher
than 80°C
100°C
MAX TPS PUMP 1 to 5 min Minimum operating duration of the solar
pump at 100% on start-up
1 minute
MIN.PUMP SPEED 50 to 100 % Minimum speed of the solar pump 50%
TUBULAR COLLECTOR YES / NO Set to YES if tubular collectors are used NO
MAX FLOW 0 to 20 l/min Maximum flow rate of the solar pump
¼ "MAX FLOW", page 52
6.7 l/mim.
(1) The menu is only displayed if the solar control system is connected and the INSTALLATION parameter is set to EXTENDED
5. Operating the appliance iSense Pro DIN - AD280
49 22/11/2012 - 300025649-001-01
50

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Remeha iSense Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Remeha iSense Pro in de taal/talen: Engels als bijlage per email.

De handleiding is 3,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Remeha iSense Pro

Remeha iSense Pro Installatiehandleiding - Nederlands - 18 pagina's

Remeha iSense Pro Gebruiksaanwijzing - Nederlands - 18 pagina's

Remeha iSense Pro Installatiehandleiding - Deutsch - 80 pagina's

Remeha iSense Pro Gebruiksaanwijzing - Deutsch - 36 pagina's

Remeha iSense Pro Installatiehandleiding - Français - 16 pagina's

Remeha iSense Pro Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info