805744
49
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
Installer level - #SECONDARY INSTAL.P menu
Parameter Adjustment range Description Factory
setting
Customer
setting
CIRC.CURVE C(2) 0 to 4 Heating curve of the circuit C
¼ "CIRC. CURVE ...", page 50
0.7
ANTICIP.C 0.0 to 10.0 Activation and adjustment of the
anticipation time
¼ "ANTICIP.B, ANTICIP.C ", page
50
NO
ROOM INFL. C (1) 0 to 10 Influence of room sensor C
¼ "ROOM S.INFL", page 51
3
SCREED DRYING NO, B, C, B+C Drying the floor
¼ "SCREED DRYING", page 50
NO
START DRYING
TEMP(3)
20 to 50 °C Screed drying start temperature 20 °C
STOP DRYING
TEMP(3)
20 to 50 °C Screed drying stop temperature 20 °C
NB DAYS DRYING(3) 0 to 99 0
NIGHT (1) DEC. The lower temperature is maintained (Night
mode)
¼ "NIGHT", page 51
DEC.
STOP The boiler is stopped (Night mode)
¼ "NIGHT", page 51
IN 0-10V(4) OFF / TEMPERATURE Activating the 0-10 V function
¼ "Function 0-10 V", page 52
OFF
VMIN/OFF 0-10V (1)
(5)
0 to 10 V Voltage corresponding to the instruction set
minimum
0.5 V
VMAX 0-10V (1)(5) 0 to 10 V Voltage corresponding to the instruction set
maximum
10 V
CONS.MIN 0-10V (1)
(5)
5 to 100 °C Instruction minimum set temperature 100 °C
CONS.MAX 0-10V (1)
(5)
5 to 100 °C Maximum set temperature 100 °C
BAND WIDTH (1) 4 to 16 K Control unit bandwidth for the 3-way valves.
Option of increasing the bandwidth if the
valves are rapid or of reducing it if they are
slow.
12 K
BOIL/3WV SHIFT (1) 0 to 16 K Minimum temperature difference between
the boiler and the valves
4 K
H. PUMP DELAY (1) 0 to 15 minutes Timing of the shutdown of the heating
pumps.
The timing of heating pump shutdown
prevents the boiler overheating.
4 minutes
HW. PUMP DELAY
(1)
0 to 15 minutes Timing of the shutdown of the domestic hot
water pump.
The timing of the domestic hot water load
pump shutdown prevents the boiler and the
heating circuits overheating (Only if a load
pump is used).
2 minutes
(1) The parameter is only displayed if INSTALLATION parameter is set to EXTENDED
(2) The parameter can be set to the heating curve by pressing key f
(3) The parameter is only displayed if SCREED DRYING is other than OFF
(4) According to the configuration
(5) The parameter is only displayed if IN 0-10V is set to ON.
(6) If a reversal valve is connected, DHW priority will always be total regardless of the setting.
iSense Pro DIN - AD280 5. Operating the appliance
22/11/2012 - 300025649-001-01 48
49

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Remeha iSense Pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Remeha iSense Pro in de taal/talen: Engels als bijlage per email.

De handleiding is 3,92 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Remeha iSense Pro

Remeha iSense Pro Installatiehandleiding - Nederlands - 18 pagina's

Remeha iSense Pro Gebruiksaanwijzing - Nederlands - 18 pagina's

Remeha iSense Pro Installatiehandleiding - Deutsch - 80 pagina's

Remeha iSense Pro Gebruiksaanwijzing - Deutsch - 36 pagina's

Remeha iSense Pro Installatiehandleiding - Français - 16 pagina's

Remeha iSense Pro Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info