757889
4
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
7. Aansluiten van de regenwateraanvoer
Het aansluiten van de regenwateraanvoer kan op
twee manieren:
a) Via een regentonvulautomaat. Zwarte uitvoering
U zaagt de regenpijp door op de hoogte van het
aansluitgat aan de voorzijde van het bovenste
Rainblock® element (zie foto).
U plaatst de regentonvulautomaat zoals
beschreven in de gebruiksaanwijzing/handleiding
(zie verpakking).
U maakt een doorvoer (boor 20 mm) in het schroef-
gat. Let op: de schroefdraad niet beschadigen!
Met het meegeleverde koppelstuk en exibele buis
sluit u de vulautomaat aan op het Rainblock®
element.
b) Via de aansluitingen op het Rainblock® element
met een Grijze uitvoering
In het bovenste Rainblock® element kunt u aan
de bovenste zijkant een doorvoer met de houtboor
d= 28 maken. Ook kunt u eventueel de aansluiting
maken in een van de bovenste gaten van de Rain-
block®. Houdt rekening met de hoogte,
de aanvoer buis moet horizontaal naar de Rainblock®
lopen om de werking niet te verliezen. ( zie hiervoor
de gebruiksaanwijzing van de regentonvulautomaat)
U plaatst de meegeleverde rubberen afdichting in
de uitsparing van de doorvoer. Vervolgens sluit u hier
een PE/PP buis d=32mm op aan, welke u aansluit
op de vulautomaat. U heeft hier een verloop 40/32
en een buis(je) d=32 mm voor nodig welke niet is
meegeleverd.
Dringend advies: plaats boven in de hemelwateraf-
voerpijp een bladvanger om blad te weren uit het
systeem.
7. Anschluss der Regenwasserversorgung
Der Anschluss der Regenwasserversorgung kann auf
zwei Arten erfolgen:
a) Über einen Regentonnenfüllautomaten.
Schwarze Version
Sie sägen das Fallrohr in Höhe des Anschlusslochs
an der Vorderseite des oberen Rainblock® Elements
durch (siehe Foto).
Sie montieren einen Regentonnenfüllautomat wie
in der Bedienungsanleitung/Gebrauchsanweisung
beschrieben (siehe Verpackung).
Sie machen einen Durchgang (20 mm Bohren) in
das Schraubenloch. Bitte beachten Sie: Beschädigen
Sie nicht das Gewinde!
Verbinden Sie den Regentonnenfüllautomat mit
dem Rainblock® Element mit Hilfe der mitgelieferten
Kupplung und des exiblen Schlauches.
b) Über die Anschlüsse zum Rainblock® Element
in grauer Ausführung
Im oberen Rainblock® Element können Sie mit dem
Holzbohrer d= 28 auf der Seite ein Loch herstellen.
Als Alternativ können Sie die Verbindung in einem
7
dans le trou de raccordement supérieur de l’un des
deux éléments inférieurs Rainblock®. Placez ensuite
le troisième élément au-dessus de l’un des deux
éléments inférieurs. Puis vissez le troisième élément
sur le poteau (voir 5). Placez ensuite le quatrième
élément de la même manière. Les deux éléments
supérieurs ne sont pas raccordés des deux côtés mais
l’un à l’autre.
ATTENTION: Veillez à ce que les joints en caoutchouc
soient bien placés dans les éléments Rainblock®, à
ce que le tube ne dépasse pas trop dans lélément
Rainblock® et ajoutez éventuellement un lubriant
uniquement sur le caoutchouc supérieur, an qu’il
glisse facilement dans le trou de l'élément Rainblock®
supérieur. Vériez les raccordements pour éviter les
fuites entre les éléments. Travaillez prudemment.
6. Positioning the third and fourth element
Now create a passage with the d=28 mm wood drill
bit for the water connection at the bottom of the third
element (see also 4). The top of the Rainblock ele-
ments have already been tted with a drill hole. Posi-
tion the connecting tube with the two rubber gaskets
in the top connecting hole of one of the bottom two
Rainblock® elements. Then position the third ele-
ment on top of the bottom two elements. Now screw
the third element to the posts (see 5). Then position
the fourth element in the same way. The two top ele-
ments will not be connected together.
PLEASE NOTE: Make sure the rubber gaskets are
properly secured in the Rainblock® elements, the
tube doesn’t protrude too far into the Rainblock®
element and only add a lubricant to the top rubber if
necessary, making sure it can easily slide into the hole
of the top Rainblock® element. Check the connec-
tions to avoid any leakage between the elements.
Work carefully.
der oberen Löcher des Rainblock® herstellen. Bitte
Höhe beachten, die Zuleitung muss horizontal zum
Rainblock® verlaufen, um ihre Funktion nicht zu
verlieren. (siehe dafür die Gebrauchsanweisung des
Regentonnenfüllautomaten) Sie setzen die mit-
gelieferte Gumminippeldichtung in die Aussparung
der Durchführung ein. Dann schließen Sie einen
PE/PP-Rohr d=32mm an, den Sie am Füllautomaten
anschließen. Sie benötigen ein 40/32- Gradient und
ein Rohr(Röhrchen) d=32 mm, das/die nicht enthalten
ist/sind.
Dringender Ratschlag: Setzen Sie einen Laubscheider
in das Fallrohr, um Blätter aus dem System fern-
zuhalten.
7. Raccordement de l’arrivée d’eau de pluie
Le raccordement de l’arrivée d’eau de pluie peut
s’effectuer de deux manières :
a) Par le biais d'un système de remplissage
automatique version Noire
Vous sciez le tuyau de récupération des pluies à
la hauteur du trou de raccordement à l’avant de
l'élément supérieur Rainblock® (voir photo).
Vous placez le système de remplissage automatique
du puisard comme décrit dans le mode d’emploi/
manuel (voir emballage).
Vous réalisez un passage (perceuse 20 mm) dans le
trou pour la vis. Attention : ne pas endommager le
letage !
Avec la pièce de jonction fournie et le tube exible,
raccordez le système de remplissage automatique
à l'élément Rainblock®.
b) Par le biais des raccordements sur l’élément
Rainblock® avec une version Grise
Dans l'élément Rainblock® supérieur, vous pouvez
réaliser un passage au niveau du côté supérieur au
moyen du foret à bois d= 28. Vous pouvez aussi éven-
tuellement réaliser la jonction dans l'un des trous
supérieurs du Rainblock®. Tenez compte de la hauteur,
la conduite d’alimentation doit aller à l’horizontale
vers le Rainblock® pour ne pas perdre le fonctionne-
ment (voir pour ce faire le mode d’emploi du système
de remplissage automatique du puisard). Vous placez
l’obturation en caoutchouc fournie dans l'évidement
du passage. Ensuite, vous raccordez un tuyau PE/PP
d=32 mm que vous raccordez au système de remplis-
sage automatique. Pour ce faire, vous avez besoin
d'un rétrécissement 40/32 et d'un tuyau
d=32 mm non fournis.
Conseil urgent : en haut du tuyau d'évacuation des
eaux de pluie, placez un récupérateur de feuilles pour
éviter la présence de feuilles dans le système.
7. Connecting the rainwater supply
Connecting the rainwater supply can be done in two
different ways:
a) Via a lling machine, black version
You cut the downspout level with the connection
hole at the front of the top Rainblock® element
(see photo).
You position the rain barrel lling machine as
described in the user instructions/manual
(see packaging).
You create a feedthrough (20 mm drill) in the screw
hole. Please note: do not damage the screw thread!
Connect the lling machine to the Rainblock®
element with the supplied connection piece and
exible tube.
b) Via the connections on the Rainblock® element
with a grey version
You can create a feedthrough with the d=28 wood
drill bit on the top side of the top Rainblock® ele-
ment. You can also possibly create a connection in
one of the top Rainblock® holes. Do bear the height
in mind, as the supply pipe must be horizontal to the
Rainblock® in order not to lose its effect. (Please refer
to the rain barrel lling machine’s user instructions)
You position the supplied rubber seal in the recess of
the feedthrough. You subsequently connect a d=32mm
PE/PP tube to this, which you then connect to the
lling machine. You will need a 40/32 adapter and
a d=32 mm tube which is not supplied.
Urgent advice: place a leaf catcher at the top
of the rainwater drainage pipe to keep leaves out
of the system.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Rainblock Saving water bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Rainblock Saving water in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 0,69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info