587563
5
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
5
Unit functionality
A portable air conditioner works in principle like a refrig-
erator. In a refrigerator, heat is withdrawn from the food
and drinks stored inside it. This heat is expelled to the
surrounding air by means of a heat-exchanger on the
back of the refrigerator.
The portable air conditioner cools the air in the room by
withdrawing heat from it. The heat absorbed is expelled
to the outside and the cooled air is resupplied to the
room where the unit is in operation.
Condensation
During cooling mode, the air that has been sucked in
from the room is cooled until it falls below the dew point
and the steam contained in it condenses on the evapo-
rator surface.
The condensed water drips into the condensation trap 7
attached under the evaporator and, from there, enters
the water tank 8.
The water tank must be emptied from time to time.
Diagram of process
Unit Description
The unit is operated with electric power and has been
designed for universal, fully-automatic, smooth opera-
tion. Its compact design lets it be easily transported and
used almost anywhere.
The device works on the principle of compression. It is
equipped with a closed-loop cooling system, a quiet ra-
dial fan which requires little maintenance and a power
cable with plug.
The fully-automatic control, integrated thermostat,
three-setting fan and water tank with integrated overflow
safety mechanism ensure proper operation of the unit.
This portable air conditioner meets the basic safety and
consumer health requirements outlined in the relevant
EU regulations. It is safe and easy to operate.
How is the air cooled in the room?
In a closed-loop cycle, there is a special medium called
a refrigerant. This refrigerant transports the excess heat
out of the room to be cooled.
At the beginning of the cycle, this refrigerant, in the form
of steam, is sucked in by the compressor 2, com-
pressed and, as a result, becomes very hot.
The heated refrigerant is routed to an exchanger
mechanism, the condensator 3. In the condensator, the
refrigerant steam is cooled by the room in the air until it
condenses. The heat is expelled over the flexible ex-
haust hose to the outside by a fan. 5.
In an injection nozzle, the flow control mechanism 4, the
pressure on the air is decreased and it is routed to an-
other exchanger mechanism, the evaporator 1.
Cold air is actually generated in the evaporator. The liq-
uid refrigerant evaporates, the heat required for this pro-
cess is withdrawn from the air in the room that the fan 6
guides via the evaporator.
The cooled air is resupplied to the room and the cycle
begins again for the refrigerant. The temperature of the
room is gradually lowered through this cyclical process.
Because the cold cycle is a closed-loop, no refrigerant
is lost or consumed.
cold air
room air
warm air
room air
1
6
4
8
7
2
3
5
Unit equipment
Handle
Water tank
Air outlet grill
Control panel
Adjustment
lever
Transport
wheels
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REMKO RKL220 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REMKO RKL220 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van REMKO RKL220

REMKO RKL220 Gebruiksaanwijzing - Nederlands - 16 pagina's

REMKO RKL220 Gebruiksaanwijzing - Deutsch - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info