587883
8
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
8
1. Remove the bridge circuit plug 2.
2. Plug the thermostat plug 3 of the
room thermostat (accessories) into
the thermostat socket 1.
3. Put room thermostat 4 in a suitable
place.
The thermostat sensor may not be
placed directly in the warm air
stream or attached to a cold sur-
face.
4. Pre-select desired room tempera-
ture on the room thermostat.
5. Set the operating switch to “I”.
When heat is required, the forced-
air burner switches on automati-
cally; operation of the unit is fully-
automatic.
Fully automatic heating with room thermostat
The unit runs fully automatically with the temperature
which has been pre-selected on the room thermostat.
1 3
Hot air distribution
The units are equipped with a high-performance axial
fan. This fan has been designed to transport the hot air
directly and effectively.
It is preferable to distribute air by means of pipes or
special hot air hoses. Warm air may only be distributed
in accordance with the fan capacity of the unit in opera-
tion.
Please follow these instructions when attaching warm
air hoses:
à Use only warm air hoses (accessories) approved by
our company.
à Make sure that the hoses and/or pipes are securely
attached to the unit’s air outlet connection.
à To prevent heat from building up, the pipes and
hoses may not have sharp kinks and bends.
à Counter pressure may not be allowed to build up
when using hoses to heat closed rooms.
à If suction temperatures increase or if there is resis-
tance on the air output opening, the forced-air burner
can be switched off at short notice by the tempera-
ture monitor (TW) in heating mode.
When the temperature falls, the burner restarts auto-
matically.
à If the intervals are too short, the length of the warm
air hoses should be checked.
G
Avoid starting the burner in frequent cycles (under
5 min.).
4
Unit Shut Down
Important information about the unit’s cool-down
phase
The air supply fan continues running to cool down the
combustion chamber and then stops at a later time.
The fan can run several times before the unit is finally
switched off.
1. Set the operating switch to “0”
OFF.
2. Shut off the fuel supply.
G
Never interrupt (except in emergency situations)
the power supply until the cool-down phase is
completely finished.
Our guarantee does not cover damages caused to
the unit by overheating.
Maintenance and Service
Regular maintenance and observance of some basic
principles are required to ensure a long service life and
to keep the unit functioning properly.
à The unit must be maintained and cleaned at regular
intervals.
à The unit must be kept free of dust and other deposits
and may only the cleaned using a dry or damp cloth.
Do not use a direct stream of water
à Do not use any aggressive cleaning agents or those
which are harmful to the environment.
à Do not use cleaning agents which contain solvents.
à Use only clean heating oil or diesel.
Make sure to keep paraffin from accumulating.
à Check oil filters regularly and replace dirty ones.
à Check the unit for mechanical damage; replace de-
fective parts when necessary.
à Check fan blades and combustion chamber with
heat-exchanger at regular intervals and clean when
dirty.
à Check oil tanks regularly for dirt and foreign objects
and clean when necessary.
à Make sure that the waste gas and combustion air
can always be properly expelled.
à Regularly check safety devices to ensure that they
are working properly.
à Always keep safety devices free of dust and dirt.
à Have the waste gas values of the burner checked
regularly by authorized personnel.
For safety purposes, we recommend entering into a
maintenance contract!
G
Prior to doing any work on the unit, make sure to
unplug it from the power source!
G
When the temperature is too high on the unit’s
outgoing air side, the heating-operation is inter-
rupted automatically by the STB!
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw REMKO CLK50 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van REMKO CLK50 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,02 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van REMKO CLK50

REMKO CLK50 Gebruiksaanwijzing - Nederlands - 16 pagina's

REMKO CLK50 Gebruiksaanwijzing - Deutsch - 20 pagina's

REMKO CLK50 Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info