490602
13
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
13
Table of contents
The term “power tool” in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
4.2 Machine-related safety
instructions
- Hold power tool by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord. Cutting accessory con-
tacting a ”live” wire may make exposed metal
parts of the power tool ”live” and could give the
operator an electric shock.
- The charger and power tool are not intended for
use by persons (including children) with limited
physical, sensory or mental ability or without
suf cient experience and/or knowledge, unless
they are supervised by a person responsible
for their safety or have been instructed on how
the charger or power tool is to be used. Chil-
dren should always be supervised to ensure that
they do not play with the charger or the power
tools.
- Take care when drilling into walls as there is a
danger of rupturing concealed gas/water pipes
or cutting through power cables.
- Do not open the battery pack or the charger.
Even after disconnection from the mains, there is
still a high capacitor voltage inside the charger.
- Make sure that metal objects (such as metal
chips) do not collect in the battery pack retain-
ing slots or enter the machine through the air
vent slits (danger of short circuit).
- Protect the battery pack from excessive heat or
constant heat sources such as sunlight or naked
ames. There is a risk of explosion.
- Never use water to extinguish burning LiIon bat-
tery packs, always use sand.
4.3 Emission levels
Levels determined in accordance with EN 60 745
are typically:
Sound pressure level L
PA
= 73 dB (A)
Noise level L
WA
= 84 dB (A)
Uncertainty K = 3 dB
CAUTION
Operating noise
Damage to hearing
Use ear protection!
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accord-
ance with EN 60 745:
Screwing a
h, S
< 2.5 m/s
2
Drilling in metal a
h, D
= 5.6 m/s
2
Uncertainty K = 1.5 m/s
2
Declared total value of vibrations was measured
according to standard measure method and can
be used for comparison one powertools with the
others.
2 Machine features
[1-1] Bit holder
[1-2] ON/OFF switch
[1-3] Right/left switch
[1-4] Gear switch
[1-5] Torque thumbwheel
[1-6] Clamp for attaching to the belt
[1-7] Lighting button
[1-8] LED light
[2-1] Buttons for releasing the battery
[3-1] LED
[3-2] Battery pack
Not all of the accessories illustrated or described
are included as standard delivery.
3 Intended use
Cordless drills are suitable for drilling into metal,
wood, plastics and similar materials as well as in-
serting and tightening screws.
The BC 3 charger is designed for charging the bat-
tery packs listed.
The user is responsible for any damages and in-
juries caused by use which does not conform to
the intended purpose; including any damages and
wear caused by permanent industrial operation.
4 Safety instructions
4.1 General safety instructions
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
1 Symbols ............................................ 12
2 Machine features ................................ 13
3 Intended use ...................................... 13
4 Safety instructions .............................. 13
5 Commissioning ................................... 14
6 Machine settings ................................. 14
7 Tool holder, attachments ...................... 14
8 Operation .......................................... 15
9 Service and maintenance ..................... 16
10 Transport ........................................... 16
11 Accessories ........................................ 17
12 Disposal ............................................ 17
13 Warranty ........................................... 17
14 EU Declaration of Conformity ................ 17
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Protool DRC 18-4 TEC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Protool DRC 18-4 TEC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 4,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info