527004
9
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
M o u n t i n g
M o u n t i n gM o u n t i n g
M o u n t i n g
i n s t r u c t i o n s
i n s t r u c t i o n si n s t r u c t i o n s
i n s t r u c t i o n s
Remove the protective plastic foils on the front of the charger.
The charging cable need only be fitted to the battery once. After this, you can simply
connect and disconnect the charger and the battery by means of the connector (at the
end of the charging cable).
1. Disconnect the minus cable from the battery pole first before
fitting the cable.
2. Hold in the clip on the connector and pull the end of the
charging cable out.
3. First connect the red battery clip to the + pole of the battery,
and then the black clip to the – pole of the battery.
4. Lay the cable in such a way that you can plug in the
connectors easily. Fix the cable securely to the frame.
5. Restore the connection between the minus cable and the
– pole of the battery.
Always connect the battery charger to the battery by means of the connector first.
After this, you can plug the charger into a working, earthed mains socket. Check that
the ‘power on’ LED and one of the LED indicators light up.
When you want to disconnect the charger from the battery, the charger must be
switched off firstly and the power plug must be removed from the outlet.
Important
ImportantImportant
Important
The connection between the charger and the battery must be made some
distance from the fuel installation.
Damaged wires/cables should be replaced immediately
T r o u b l e
T r o u b l eT r o u b l e
T r o u b l e s h o o t i n g
s h o o t i n gs h o o t i n g
s h o o t i n g
Problem (Possible) cause Action
‘Error’ lights on.
Reversed polarization of the
cables.
Remove the connection and
attach the cables correctly.
The battery is connected
to the charger
and
the
charger is plugged into
the socket.
The ‘power on’ LED is
the only one lighting.
1. Weak or no connection
between the battery and
the charger.
2. Fuse between the charging
cable is defective.
1. Check the connection and
the wires.
2. Replace the fuse.
The battery is connected
to the charger
and
the
charger is plugged into
the socket.
The red and green
LED’s are on.
simultaneously.
(‘power on’ does burn)
The battery is switched on but
the connection with the battery
is lost.
1. Weak connection between
the battery and the charger.
2. Fuse between the charging
cable is defective.
3. Battery is defective.
1. Check the connection and
the wires.
2. Replace the fuse.
3. Measure the acid and, if
necessary, replace the
battery.
The battery is connected
to the charger
and
the
charger is plugged into
the socket.
The yellow LED is the
only one lighting.
(‘power on’ doesn’t burn)
1. Mains voltage is to low or
no mains voltage.
2. The charger is in a
thermical stop.
1. Measure the mains
voltage. It should be higher
then 180VAC.
2. the charging process will
continue automatically
when the charger has
could down.
The battery is not
connected and you don’t
measure any voltage.
The charger needs a inverse
voltage (from a battery) before
it works.
Connect a battery to the
charger.
The red or yellow led
continues to burn.
1. The battery is defective
2. There are heavy
consumers connected to
the battery.
1. Measure the acid and, if
necessary, replace the
battery.
2.
Turn off as many users as
possible.
When the IC-Twin still is not functioning well after the actions stipulated, you may
return the charger to your retailer. The charger must be sent prepaid. Don’t try to
repair or open the charger yourself.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Proosten IC-TWIN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Proosten IC-TWIN in de taal/talen: Nederlands, Duits, Engels als bijlage per email.

De handleiding is 0,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info