552341
38
Verklein
Vergroot
Pagina terug
1/78
Pagina verder
38
The manufacturer shall not be liable for damages
caused by not intended use.
Supplied parts
1 base device with motor
1 feeder tray
1 screw press
1 sieve
1 rotary scraper
1 transparent container
1 pomace container
1 juice container
1 cleaning brush
Unpacking the appliance
1. Remove the device from its packaging.
2. Remove all packaging materials like foils, lling
materials, cable holders, and carton packaging.
3. Check the scope of deliveries for completeness.
4. If there are missing parts or obvious damage,
do not use the device. Return it to your retailer
immediately.
NOTE:
There may still be dust or production remains on
the device. We recommend that you clean the
device as described under “Cleaning”. Disas-
semble the device in reverse order as described
in the chapter “Preparations”.
Description of the Parts
1 Tamper
2 Feeder tray
3 Screw press
4 Sieve
5 Rotary scraper
6 Transparent container
7 Gearwheel
8 Switch
9 Mains cord with mains plug
10 Juice container
11 Base device with motor
12 Pomace container
13 Drive shaft
No illustration: Cleaning brush
Preparations
For assembly, also refer to the illustrations on page
3.
1. Position the device in such a way that the
switch is on the right.
2. Attach the container (6) to the base unit and
secure the container with a short turn clock-
wise.
CAUTION:
Make sure the rubber plug is attached to the
pulp container outlet (see g. A). Otherwise
the pulp could get into the motor housing and
damage the device.
NOTE:
The container can only be tted according to
the illustration on page 3.
3. Place the rotary scraper (5) in the container.
Make sure the guide lugs engage into the
gearwheel (7).
NOTE:
During disassembly, the rubber strips might
fall off the scraper. Make sure to re-attach
them correctly before reassembling the
device.
4. Place the sieve (4) in the container. Make
sure to align the guide lug of the sieve with the
recess in the container. The recess is located
opposite the cogwheel.
5. Then attach the screw press (3). Make sure
the guide lugs engage into the gearwheel.
6. Put the feeder tray (2) on the container with the
marking “
” on the container and the marking
on the tray being aligned on top of each
other. (See left side.)
7. Turn the feeder tray clockwise until it locks.
8. Put the juice container (10) under the juice
outlet on the right.
9. Put the pulp container (12) under the pulp
outlet on the left.
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ProfiCook PC-SJ 1043 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ProfiCook PC-SJ 1043 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 5,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info