645073
5
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
POWX1420 EN
Copyright © 2016 VARO P a g e | 5 www.varo.com
6 ASSEMBLY
Check for damage to the tool, parts and accessories which may have occurred during
transportation. Take some time to read this manual carefully and understand all the content
prior to assembly and operation.
CAUTION! Always ensure that the tool is switched off and unplugged from
the mains supply before assembly.
6.1 Changing the blade (Fig. 1, 2, 3)
Place the saw on its side of a flat surface.
Rotate the saw blade (13) by hand while depressing the spindle lock button (8) until the
blade is locked. Turn the blade clamp screw (3) use the hex (D) provided in anti-clockwise
direction.
Remove the blade clamp screw (3), the washer and the outer flange.
Lift the lower guard (10) by using the lower guard lever (4) and remove the blade (13).
Clean the saw blade flanges and then mount the new saw blade onto the spindle, which is
against the inner flange.
Make sure the saw teeth and arrow on the blade point in the same direction
Reinstall the outer flange, washer and tighten the blade clamp screw (3).
Make sure the saw blade (13) can turn freely by turning the blade by hand.
6.2 Parallel cut adjustment (Fig 4)
Loosen the edge guide locking screw (2).
Slide the edge guide (C) through the slots in the base plate (14) to the desired width.
Tighten the edge guide locking screw (2) to secure it in the position.
Ensure that the fence guide (C) rests against the wood along its entire length to give a
consistent parallel cuts.
6.3 Dust extraction (Fig. 5)
The circular saw is a powerful tool capable of producing a large amount of dust. As the tool
has a fully enclosed blade, forced dust extraction is particularly efficient. Forced dust
extraction should be used for all but small trimming jobs.
Push the dust extraction hose (B) on to the dust extraction nozzle (12).
Connect a vacuum device approved for the extraction of sawdust and splinters to the dust
extraction hose (B).
7 OPERATION
7.1 Switching on and off (Fig. 6)
Note: Before engaging the on/off switch, check the saw blade to see if it is
fitted properly and runs smoothly, and the blade clamp screw is well
tightened.
Connect the plug to the power supply.
To start the tool, depress the unlock button (5) and press the switch trigger (6).
Release the trigger (6) to turn the tool off.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX1420 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX1420 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX1420

Powerplus POWX1420 Gebruiksaanwijzing - Nederlands - 10 pagina's

Powerplus POWX1420 Gebruiksaanwijzing - Deutsch - 10 pagina's

Powerplus POWX1420 Gebruiksaanwijzing - Français - 10 pagina's

Powerplus POWX1420 Aanvulling / aanpassing - Alle talen - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info