676177
9
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
POWX0026LI EN
Copyright © 2017 VARO P a g e | 9 www.varo.com
The torque force is set by means of a torque setting according to the size of screw and the
kind of material. Select the suitable torque for the job to be performed. Long screws and/or
hard material require a higher torque setting.
8.6 Speed selector (Fig. 7)
NOTE the L-mark is the “Low speed position, the H-mark is the “High speed” position
(marks moulded in the button of two speed selector (3).)
The drill has a two-speed gear box designed for drilling at L (LOW) or H (HIGH) speed. The
gear selector is located on top of the drill to select either low or high speed. When you push
the button (5) forward and select low speed range, the speed will decrease but will provide
more power and torque.
When using the drill in the high speed range, the speed will increase but will provide less
power and torque. Use the low speed for high power and torque applications and the high
speed for fast drilling applications.
Important: NEVER adjust this two speed selector3while the drill is running. Always let it
come to a complete stop.
8.7 LED light (Fig. 8)
The LED work-light9can be lit prior to motor running.
Press the on/off switch lightly, to keep the work area lighted.
It also lights during operation.
NOTE: The LED work-light is switched off delayed with about 5 sec.
WARNING:
Do not stare directly at the light beam. Never aim the beam at any person or an object other
than the work piece.
Do not deliberately aim the beam at persons!
8.8 Drilling
Before drilling, the torque setting should be set on the drill position ”.
When drilling hard smooth surface, use a centre punch to mark the desired hole location. This
will prevent the drill bit from slipping off centre as the hole is started. Hold the tool firmly and
place the tip of the drill or bit into the work piece, applying only enough pressure to keep the
bit cutting. Do not force or apply side pressure to elongate a hole.
8.8.1 Drilling in wood
For maximum performance, use high speed steel (HSS° drills for wood drilling, turn the torque
setting on the drill position“ ”. Begin drilling at a very low speed to prevent the bit from
slipping off the starting point. Increase the speed as the drill bit bites into the material. When
drilling through holes, place a block of wood behind the work piece to prevent ragged or edges
on the back side of the hole.
8.8.2 Drilling in metal
For maximum performance, use high speed steel (HSS) drill bits for metal or steel drilling.
Turn the torque setting on the drill position“ ”. Begin drilling at a very low speed to prevent
the bit from slipping off the starting point. Maintain a speed and pressure which allows cutting
without overheating the bit. Applying too much pressure will overheat the drill, wear the
bearings, bend or burn bits, produce off-centre or irregular shaped holes.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWX0026LI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWX0026LI in de taal/talen: Engels als bijlage per email.

De handleiding is 0,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWX0026LI

Powerplus POWX0026LI Gebruiksaanwijzing - Nederlands - 13 pagina's

Powerplus POWX0026LI Gebruiksaanwijzing - Deutsch - 14 pagina's

Powerplus POWX0026LI Gebruiksaanwijzing - Français - 13 pagina's

Powerplus POWX0026LI Aanvulling / aanpassing - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info