675214
6
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
POWP6050 EN
Copyright © 2018 VARO P a g e | 6 www.varo.com
7.2 Depth adjustment (Fig. 2)
Locate the depth stop (4) on the left-hand side of the cutting machine. This continuously
adjustable stop is intended to limit the depth of the cut. Loosen it by turning it in anticlockwise
direction. To move the depth stop up or down to the desired depth according to the marker of
the scale label (3).
NOTE: Make sure the locking knob (10) is fixed firmly when operating this
machine.
7.3 Locking lever (13) for cutting machine body
When viewed from the front, the locking lever is located at the rear on the left-hand side. The
cutting machine body is spring-tensioned. Take care when releasing the locking lever. Grasp
both handles and brace yourself before releasing the lever. Press downwards to allow the
cutting machine body to move down. When you reduce the downward pressure, the springs
force the cutting machine body back up into its highest position.
The released position (a) or lock position (b) of locking lever as shown in Fig. 3.
CAUTION: The housing of the machine is under spring tension. When you
release the locking lever, it returns to its highest position.
7.4 Mounting and adjusting the parallel guide (Fig. 4)
The parallel guide can be used for cutting parallel to the edge of the work-piece.
Fit the guide rods (a) to the frame using the screws (b).
Release the two lock knobs securing the parallel guide and push them in so that the guide
is at the desired distance from the cutter head.
Tighten the two lock knobs.
Press the guide securely against the edge of the work-piece and execute the cut.
CAUTION: Abnormal vibrations may be due to a blunt cutter head.
7.5 Fitting the centre point (Fig. 5)
The centre point is used for routing circles.
Remove a guide rod (a) from the parallel guide.
Mount the centre point (b) to the guide rod.
Slide the guide rod in the router base plate and tighten the lock knobs.
Position the tip of centre point at the centre of your circle.
Press it slightly so that the tip is firmly in the wood. You can now cut the circle.
7.6 Dust extraction outlet (Fig. 6)
It is advised to use the dust extraction outlet. You can purchase a suitable
commercial vacuum cleaner or extract the dust via an extractor tube while
the cutting machine is in operation. The outlet must project out of the rear
of the machine. Two bolts and nuts are supplied to attach it.
Hold the dust extraction outlet (14) in position and lay the cutting machine on its side.
Push the screw through the hole of the template guide (a), dust extraction outlet (14) and
routers base plate (8) and until it projects at the fastening point for the dust extraction
outlet.
Tighten the screw with a suitable screwdriver and moderate force until the outlet is
securely attached.
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POWP6050 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POWP6050 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,31 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POWP6050

Powerplus POWP6050 Gebruiksaanwijzing - Nederlands - 10 pagina's

Powerplus POWP6050 Gebruiksaanwijzing - Deutsch - 11 pagina's

Powerplus POWP6050 Gebruiksaanwijzing - Français - 10 pagina's

Powerplus POWP6050 Aanvulling / aanpassing - Alle talen - 7 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info