481008
9
Verklein
Vergroot
Pagina terug
1/13
Pagina verder
POW8041 EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
Always push the workpiece through as far as the end of the (30) splitter. {Fig. 7)
When the cut is completed, the guard hood (17) closes, again automatically and covers
the blade (5).
Switch off the saw.
Important: Secure long workpieces from sagging at the end of the cut (e.g.
with a roller table etc.).
7.1.4 Making cross cuts (Fig. 8/9)
Insert the cross and parallel stop (18) from the right into the lateral slot of the saw table
(16).
Tighten the locking screw (28) until the cross stop (18) can be moved in the slot of the saw
table (16) with little play.
Slacken the knurled screw (25), move the cross stop (18) to the required angular setting
and fix in position.
Slacken the two knurled screws (26) and Slide the stop rail (27) to the left until it no longer
touches the blade guard (17) when moved forward. Re-tighten the screws (26).
Switch on the saw.
Press the workpiece firmly against the stop rail (27) and slowly slide it together with the
cross stop (18) against the blade (5) *n order to make the cut.
When the cut is completed, switch off the saw.
7.2 Using as a mitre box saw
Convert the saw to mitre-box saw mode (see 6.2.1)
7.2.1 Settings (Fig. 2/3)
The machine head can be tilted a max. 45° lo the left by undoing the clamping screw (22)
with the hex wrench (19).
The rotary table (8) can be adjusted from -45° to +45A by undoing the locking screws (10).
7.2.2 On/Off switch {Fig. 2)
The saw is started by pressing the On/Off switch (3). The switch has to be kept pressed
while making the cut.
7.2.3 90° cross-cuts and 0° rotary table (Fig. 2)
Convert the saw from bench-type circular saw mode to mitre box saw mode.
Press the main switch (3) to turn on the saw.
Wait for the blade to reach its maximum speed before starting the cut.
Place the workpiece on the lower saw table (9) and press it against the stop rail with your
left hand. Always position the material firmly on the machine bed so that it cannot move
about while it is being cut.
With the other hand, press the release button (1) and lower the machine head by its
handle (2) smoothly and with slight pressure down through the workpiece to make the cut.
When the cut is completed, return the machine to its top parking position and let go of the
On/Off switch.
Caution! A return spring causes the machine head to rise automatically at
the end of the cut. Do not let go of the handle (2) as soon as the cut is
completed but steady the machine head and allow it to rise slowly,
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Powerplus POW8041 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Powerplus POW8041 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Powerplus POW8041

Powerplus POW8041 Gebruiksaanwijzing - Nederlands - 13 pagina's

Powerplus POW8041 Gebruiksaanwijzing - Deutsch - 14 pagina's

Powerplus POW8041 Gebruiksaanwijzing - Français - 14 pagina's

Powerplus POW8041 Aanvulling / aanpassing - Alle talen - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info