542823
5
Verklein
Vergroot
Pagina terug
1/22
Pagina verder
9
8
HOW TO SET THE WATCH
In the Time of Day display you can set the following three watch
functions:
- Alarm
- Time
- Date
Each function is represented by a block in the graphic bar in the above
order. A flashing block means that you are setting the corresponding
function.
Setting the 12/24h display
1. In the Time of Day display, press and hold SET/
START/STOP. Release.
12 h mode with AM/PM indicator is
activated.
2. Press and hold again. Release.
24 h mode is activated.
3. The chosen mode is now used in all watch and
alarm functions.
If you chose the 24 h mode you can skip those parts in
the following instructions, which advise you to set AM or
PM.
Start here for the setting of alarm, time and/or date:
1. In the Time of Day display press the SET/START/STOP-
button.
SET starts to flash in the upper right corner of the display.
• ALM appears on the display.
Alarm symbol starts to flash.
The uppermost block of the graphic bar on the right, represent-
ing the setting of Alarm, starts to flash.
2. Go through the setting of alarm, time and date step by step by
following the instructions.
You can also go directly to set just one particular function by pressing
SET/START/STOP shortly as many times as needed until you see the
corresponding symbol of the desired function in the display and the
block flashing. Now follow the instructions for setting that particular
function.
Setting the alarm
Alarm Symbol is flashing.
1. Press SIGNAL/LIGHT to set the alarm on
(
appears) or alarm off ( disappears).
2. Press STORE/LAP/RECOVERY to lock your
selection.
AM starts flashing.
3. Press SIGNAL/LIGHT to select AM or PM.
4. Press STORE/LAP/RECOVERY to lock your
selection.
The first two digits, representing the hours, start
flashing.
5. Press SIGNAL/LIGHT to select the desired hour.
The digits run faster if you press and hold the SIGNAL/LIGHT button.
Release the button when the desired value is approaching.
6. Press STORE/LAP/RECOVERY to lock your selection.
The last two digits, representing the minutes, start flashing.
7. Press SIGNAL/LIGHT to select the desired minutes.
8. Press STORE/LAP/RECOVERY to lock your selection.
9. Press SET/START/STOP to enter the time setting mode.
AM starts flashing.
10. Now continue from Setting the time.
To return immediately to Time of Day display, press the SELECT button
twice.
When the alarm comes on it will sound for one minute or you can turn
it off by pressing STORE/LAP/RECOVERY button.
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Polar VANTAGE NV bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Polar VANTAGE NV in de taal/talen: Engels als bijlage per email.

De handleiding is 1,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info