321386
6
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
1 Always unplug cord from electrical outlet and set the Steam
Control to position 0.
2 Fill the removable water reservoir to the maximum level.
Do not use vinegar or other descaling agents to self clean your iron.
3 Plug cord in electrical outlet.
4 Set the Temperature Control to MAX.
5 Allow iron to heat up for two minutes.
6 Turn Temperature Control to Min and unplug iron when the
Amber Pilot Light has gone out.
7 Hold the iron over the sink,press and hold the self-clean
button and gently shake the iron.
4
Steam and boiling water will come out of the soleplate. Impurities and
scale (if any) will be flushed out.
8 Release the self-clean button as soon as all the water in the
reservoir has drained out.
Repeat the self-cleaning process if the iron still contains a lot of
impurities.
After self-cleaning
- Plug in the iron and reheat for 2 minutes.This will enable interior of
the iron to dry before storing.
- Unplug the iron when the Amber Pilot Light has gone out.
- Move the hot iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
- Let the iron cool down completely before you store it.
Maintenance and Storage
1 Set the Temperature Control to Min position. Unplug cord
from electrical outlet and let the iron cool down completely.
2 Wipe scale and any other deposits off the soleplate with a
damp cloth and a non-abrasive (liquid) cleaner.
Keep the soleplate smooth: avoid hard contact with metal objects.
3 Regularly rinse the removable water reservoir with water.
Empty the removable water reservoir after cleaning or before
storing.
7
Shot of Steam
This function can also be used when you hold the iron in vertical
position.
A powerful "shot" of steam helps remove stubborn creases.
The Shot-of-Steam function can only be used at temperature settings
between and MAX.
1 Press and release the Shot-of-Steam button.
Wait for a while before using the button again to avoid spluttering.
Never direct the steam towards people.
Anti-Calc Filter
The built-in Anti-Calc Filter reduces deposit of scale and helps
prolong life of the iron.
Auto-off
An electronic safety device will automatically switch off the iron if it has
not been moved for a while.
To indicate that the iron has been switched off,the Red Auto-
Off Pilot Light will start blinking.
In a horizontal position, this will happen after 30 seconds.
In a vertical position,this will happen after 8 minutes.
To heat up the iron again:
- Pick up the iron or move it slightly.
- The Red Auto-Off Pilot Light will go out.The Amber Pilot Light will
come on.
- When the Amber Pilot Light has gone out and comes on again, the
iron is ready for use.
sELF-Self-Cleaning
The self-clean function removes scale and impurities.
Use the self-clean function once every two weeks.If the water in your
area is very hard, the self-clean function should be used more
frequently.
6
HI478/IRON.FA 1/13/00 2:35 PM Page 10
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips hi478 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips hi478 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info