321386
5
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
Steam Ironing
Bell Vent Pattern on soleplate steams and presses twice in one
a c t i o n .
M a k e sure that there is enough water in the remov a b le water reservo i r.
1 Set the Temperature Control to the recommended position.
See section 'Setting the temperature.'
2 Set the Steam Control to the appropriate steam position.
- 1-2 for moderate steam (temperature settings to )
- 3-4 for maximum steam (temperature settings to MAX)
Steaming will start as soon as the set temperature has been reached.
Other features
Spraying
To remove stubborn creases at any temperature, make sure that
there is enough water in the removable water reservoir.
1 Press the spray button a couple of times to moisten the fabric.
Drip Stop System
The Drip Stop System continuously monitors soleplate temperature
and automatically shuts off water supply if iron is too cool to steam.
Drip Stop System virtually eliminates water dripping from soleplate and
onto your fabric.
IMPORTANT:The iron will automatically stop steaming at insufficient
temperatures.This is due to the Drip Stop System’s valve closing when
the temperature of the soleplate is too cool to produce steam.
5
3 Press and hold the removable water reservoir release buttons
and remove the removable water reservoir.
4 Open the filling cap.
5 Pour tap water into the removable water reservoir up to the
maximum level.
Do not fill the reservoir beyond the MAX indication.
6 Wipe off any excess water before plugging iron into outlet.
If the tap water in your area is very hard, we advise you to mix it with
an equal portion of distilled water, or to use distilled water only.
Do not use vinegar, starch or chemically descaled water.
7 Press to close the filling cap (click!) and put the removable
water reservoir onto the iron.
Setting the temperature
1 Put the iron on its heel.
2 Plug cord in electrical outlet.
3 Set the Te m p e r a t u re Control to the re q u i red ironing temperature
by turning it to the ap p ropriate temperature indicator.
- Check the garment label for the required ironing temperature:
Synthetic fabrics (e.g. acrylic, viscose, polyamide, polyester)
Silk
Wool
Cotton, linen
- If you do not know what kind of fabric(s) the garment is made of, try
to determine the right ironing temperature by ironing a part that will
be invisible when you wear the garment.
- S i l k ,woolen and synthetic materi a l s :iron the reve rse side of the fabri c
to prevent shiny spots.To prevent stains,avoid using the spray function.
- Start ironing the articles that require the lowest ironing temperature
first, such as those made of synthetic fibers.
4 Start ironing when the Amber Pilot Light has first gone out and
then comes on again.
The Amber Pilot Light will come on from time to time during ironing.
4
HI478/IRON.FA 1/13/00 2:35 PM Page 8
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Philips hi478 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Philips hi478 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info