45
VQT8645
For Your Reference
[CHG] indicator
≥You pressed a button while the unit was in
hold mode. Release hold mode.
Displays
NO PLAY
“bAT Err” and a number
appear on the display.
Messages do not appear
on the television.
GUI screens are cut off or
are not displayed at all.
U11
H ∑∑
∑∑ stands for a number.
The unit cannot play this disc.
“bAT Err 1”: A problem has occurred with the battery pack.
Consult your dealer.
“bAT Err 2”: The pack has been recharging for 12 hours
but has failed to recharge for some reason.
Recharge again.
“bAT Err 3”: The battery pack has overheated during
recharging. Allow the pack to cool down
before recharging again.
Go to the initial settings menu and turn the On-Screen
Messages on.
Go to the initial settings menu and change the position of
the GUI screens.
Wipe the disc clean.
Trouble has occurred. The number appearing after H
depends on the problem. Turn the unit off and on again.
Alternatively, turn the unit off, disconnect the power source
(AC or battery pack) reconnect the power and turn the unit
on again.
If the service numbers fail to clear, note the service number
and contact a qualified service person.
10
—
—
—
32
32
11
—
Flashes slowly
Flashes
≥Battery pack charge is low. The unit will turn
off after a few minutes.
≥A problem occurred with the battery pack.
Confirm the display on the unit’s display
(➡ see above).
[Í] and [CHG] indicators
This chart shows how these indicators flash under certain conditions.
; refers to the length of time that the indicator is ON.
Flashes when you press a button
[Í] indicator
Note
The following do not indicate malfunction.
≥A sound is heard from the AC adaptor during recharging.
≥The battery pack warms up after recharging or during use.
1 second
1 second
1 second
