563932
7
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
7
VQT4Z19
If you want to perform wireless setting with your
Mac/PC, or you want to apply the advanced setting,
try “Method 4” on page 8.
To cancel this setting in the middle, press [Í] to turn off this
system.
Simultaneous use with other 2.4 GHz devices, such as
microwaves, cordless telephones, etc., may result in
connection interruptions.
For up to date compatibility information on your wireless
network router refer to
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Using the WPS Push Button Configuration
(PBC)
1 Press [SETUP] on the remote control repeatedly
to select “Net Setup” and then press [OK]. *1
“With iPod” is indicated on the display.
2 Press [SETUP] on the remote control repeatedly
to select “WPS Push” and then press [OK]. *1
“WPS” flashes on the display.
Complete step 3 within 2 mins.
3 After “WPS” is indicated, press the WPS button
on the wireless network router.
4 The settings are completed when “Success” is
displayed.
” is indicated on the display.
5 Press [OK] on the remote control to exit the
setting.
This system can also be set using the WPS PIN code.
(Before starting, refer to the wireless network router’s
operating instructions for details on how to enter the PIN
code.)
1 Press [SETUP] on the remote control repeatedly to
select “Net Setup” and then press [OK].*2
2 Press [SETUP] on the remote control repeatedly to
select “WPS PIN” and then press [OK].*2
3 Enter the PIN code into the wireless network router.
*1 Replace with the following step.
Press and hold [D.BASS] on the main unit for 2 seconds
while pressing and holding [] on the main unit.
*2 Replace with the following steps.
1 Press and hold [D.BASS] on the main unit for 2 seconds
while pressing and holding [] on the main unit.
2 When “WPS” is indicated, press and hold [D.BASS] on
the main unit for 2 seconds while pressing and holding
[] on the main unit again.
With this method you will share the wireless network
settings of your iPod touch/iPhone/iPad with this system.
The following explanations are based on an iPhone.
1 Disconnect iPod/iPhone/iPad connected to the
main unit.
2 Connect the iPhone to your home wireless
network.
3 Connect the iPhone to the main unit.
4 Press [SETUP] on the remote control repeatedly
to select “Net Setup” and then press [OK].
“With iPod” is indicated on the display.
5 Unlock your iPhone and then press [OK] on the
remote control.
“Connecting Wi-Fi” is indicated on the display.
If “Not Supported” or “Set Wi-Fi” is displayed, check
that the iPhone is connected to the wireless network
and try again from step 1.
6 A message will pop-up on your iPhone.
Allow the iPhone to share the wireless network
settings.*
1
7 The settings are completed when “Success” is
displayed.
” is indicated on the display.
8 Press [OK] on the remote control to exit the
settings.
*1: Depending on the network environment or the wireless
network router settings, it may take more than 10 mins.
to complete the settings.
You can make the wireless network settings with the
app, “Panasonic Stereo System Network Setup” (for
free).
If you’re using an Android device, download the app at
Google Play™. If you’re using an iPod touch/iPhone/
iPad, download it at the App Store.
Preparation
Connect your smartphone to your home wireless
network.
Check the password for your home wireless network.
1 Press [SETUP] on the remote control repeatedly
to select “Net Setup” and then press [OK].
“With iPod” is indicated on the display.
2 Press [SETUP] on the remote control repeatedly
to select “Manual” and then press [OK].
“Setting” blinks on the display.
3 Start “Panasonic Stereo System Network Setup”
on your smartphone and follow the indications.
(Continued on the next page)
Method 1
If your wireless network router supports WPS
(Wi-Fi Protected Setup
TM
).
The WPS identifier mark
WPS Push Button Configuration
(PBC) compatible wireless
network router may have this
mark.
“Fail” may be displayed if the connection was not made
within the set time limit. Try the setting again. If “Fail” is
still displayed, try other methods on page 7 or 8.
Method 2
If you're using an iPod touch/iPhone/iPad.
(iOS version 5.0 or later.)
If “Fail” is displayed press [OK] and try the setting
again. If “Fail” is still displayed, try other methods on
page 7 or 8.
If the iPhone was disconnected midway through, try
again without disconnecting it.
Method 3
Setting the network connection with the smartphone
app.
SC-PMX9-VQT4Z19.book 7 ページ 2013年3月21日 木曜日 午後4時16分
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Panasonic SC-PMX9DB bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Panasonic SC-PMX9DB in de taal/talen: Engels als bijlage per email.

De handleiding is 1,96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Panasonic SC-PMX9DB

Panasonic SC-PMX9DB Gebruiksaanwijzing - Nederlands - 84 pagina's

Panasonic SC-PMX9DB Snelstart handleiding - Nederlands - 1 pagina's

Panasonic SC-PMX9DB Snelstart handleiding - Deutsch - 1 pagina's

Panasonic SC-PMX9DB Gebruiksaanwijzing - Deutsch - 84 pagina's

Panasonic SC-PMX9DB Snelstart handleiding - English - 1 pagina's

Panasonic SC-PMX9DB Snelstart handleiding - Français - 1 pagina's

Panasonic SC-PMX9DB Gebruiksaanwijzing - Français - 84 pagina's

Panasonic SC-PMX9DB Snelstart handleiding - Italiano - 1 pagina's

Panasonic SC-PMX9DB Gebruiksaanwijzing - Italiano - 84 pagina's

Panasonic SC-PMX9DB Gebruiksaanwijzing - Dansk - 64 pagina's

Panasonic SC-PMX9DB Snelstart handleiding - Dansk - 1 pagina's

Panasonic SC-PMX9DB Snelstart handleiding - Svenska - 1 pagina's

Panasonic SC-PMX9DB Gebruiksaanwijzing - Svenska - 64 pagina's

Panasonic SC-PMX9DB Snelstart handleiding - Suomi - 1 pagina's

Panasonic SC-PMX9DB Gebruiksaanwijzing - Suomi - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info