577473
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
BA SC28X2_SC28X4pro MP; DE, GB - 22426 2008.03-02
*Within astro time switches
**Within standard (non-astro) time switches
***One-channel version
Instruction Manual (Site 1 / 2)
GB
Time switch (with Astro function)
müller SC 28.X2 pro / SC 28.X4 pro paladin 172 4X2 pro / 172 4X4 pro
Connection diagram Directory 1. Safety instructions 2. Initial operation
The time switch is delivered in sleep-mode, the display is switched off.
Press -button for 1 second.
The current date and time is already programmed and European daylight savings time is
activated.
Select the desired language by pressing -buttons and confirm it by pressing .
(Remark: By pressing you move one step backwards from the current position)
If required, date, time and daylight savings time mode can be adjusted also by pressing
-buttons and a subsequent confirmation with .
1 channel
2 channels
1. Safety instructions
2. Initial operation
3. Menu overview
4. Symbol legend
5. Key function
6. Handling advice
7. Channel ON OFF / Permanent P
8. New Program
9. Example „New Program“
10. Program permanent
11. Pulse
12. Cycle
13. Cycle options
14. Astro-function
15. Astro-adjustments
16. External Input
17. Channel keys
18. Switchoff warning
19. Additional adjustments
19. Reset-Function
20. Program modify
21. Data-key
!
The installation and assembly of electrical
equipment must be only carried out only by a skilled
Person! Otherwise fire danger or danger of an
electric shock exists!
!
Connect the supply voltage/frequency as stated on
the product label!
!
Warranty void if housing opened by unauthorised
person!
!
The electronic circuit is protected against a wide
range of external influences. Incorrect operating
may occur if external influences exceed certain
limits!
Further adjustments when operating an astro time switch:
When using the astro function it is obligatory to enter the geographical position of the place
of the installation of the device. Choose with -buttons between „location“ (pre-defined
cities) and „position“ (longitude and latitude). Confirm your choice again with . (The
easiest way is choosing a pre-defined city within the „locations“-menu.)
Enter the nearest city or the geographical coordinates with -buttons and confirm with
3. Menu overview 4. Symbol legend
Channel is switched ON
Channel is switched OFF
For the current date the “holiday program” / “permanent by date” is activated
Standard programming step
Current state is based on a manual over-ride. The state will be cancelled with the next programming step.
Current state is based on a manual over-ride. The state is permanent until terminated manually (7 / 17).
Days of the week Monday, Tuesday, ... Sunday;
The underscores indicate if the program is active for the days above.
Element within sub-menu “program delete”
*Astro function: Current state is based on a sunrise or sunset taking into account an optionally adjusted
Offset (14 / 15).
I
**Current state is based on a switching time with pulse function
Z
**Current state is based on a switching time with cycle function
e
***Is displayed if the corresponding channel is activated by the external input.
*Within astro time switches
**Within standard (non-astro) time switches
The time switch is locked; to unlock the device the PIN has to be entered (19).
5. Key function 6. Handling advice 7. Channel ON OFF / Permanent P
1. To access the Enter-mode (program, adjustments, options) from the automatic-mode.
2. To revert to the beginning of the current (sub-) menu.
1. To adjust the flashing digit.
2. To scroll through a choice
1. Automatic-mode: To switch the channel ON or OFF until the next programming step occurs.
2. Automatic-mode: A push longer than 3 sec. = Permanent switching status (7).
1. To activate the time switch when operated without power supply.
2. To confirm the selection or the entered data.
The time switch is programmable without external power supply after
pressing the
-button.
To revert one step or one level back while in the Enter-Mode press .
After completion of a (sub-) menu confirming end will return the device
into the automatic-mode.
With the choice changes from end to continue. By confirming
continue the time switch returns to the beginning of the current
(sub-) menu.
When confirming end before completion, the time switch returns to the
automatic-mode without saving the entered data.
Channel
ON OFF
By pushing
-buttons ( -buttons) a manual switch of the
channels take place. The resulting switching status is marked
with the hand-symbol and remains until the next programming
step occurs. (temporary over-ride)
Permanent switching status
P
By pressing the corresponding channel button for more
than 3 sec. the channel is permanently switched ON or OFF.
The status remains until the next manual switching occurs (> 3
sec.). (permanent over-ride)
8. New Program (See also the example (9)) 9. Example „New Program“ (For a regular switching time)
Step A. to C. please refer to point 9. (Example “New Program”)
Menu navigation of the programming of a switching time (standard (non-astro) time switch)
Menu navigation of the programming of a standard or astro switching time (astro time switch)
Pulse and recycle function are not available within time switches with astro function.
A. If power supply is disconnected press
for one second. The display appears in Automatic-Mode.
B. Press
, the time switch is now in the Enter-Mode.
C. Confirm
Program with .
D. Confirm
new program with .
E. Choose the desired channel with
and confirm with .
F. For regular switching times choose
on or off with -buttons and confirm with . (The astro
switching times
astro ON or astro OFF please refer to point 14 / 15)
G. Within this level you activate the days of the week (1…7) on which the switching time should happen.
With
you activate “yes” or deactivate “no” the corresponding date. Confirm each day with .
H. Adjustment of the time: Hours
and . Minutes and .
I. Verify the entered switching time: If the flashing summary of the programming step is correct, verify
on
or
off with . After verification you have the choice between edit/delete and end with .
J. If you want to proceed with programming, confirm
next switching with .
To leave the programming menu confirm
end.
Programming of a switching time with pulse function see point 11
Programming of a switching time with recycle function see point 12 / 13 (not within astro time
switches)
Programming of a astro-switching time see point 14 / 15 (only within astro time switch)
10. Program permanent 11. Pulse
Program -> new program -> channel A/B -> permanent ->
One permanent by date programming step (holiday function) for each channel is possible. During the desired period (The
function is valid for the whole days) the channel can be switched off (permanent off) or on (permanent on).
The programming of this function is as described in (8 / 9).
The choice permanent will not be offered anymore within the menu new program when already in use. The switching
time can be modified and deleted within Program modify (20) and Program delete (19) respectively.
Program -> New program -> Channel A/B ->
The pulse function provides you the opportunity of programming a switching time with a defined duration.
As soon as the pulse-duration has expired the time switch switches OFF automatically (the duration of the pulse is up to 59:59
mm:ss).
The programming is carried out like a standard switching time (see point 8 / 9) with following differences
Choose Pulse function (9F).
Define the duration of the pulse (pulstime minute / pulstime second).
Program the days of the week
Program the switching time (time hour / time minute)
Validation: Confirm the blinking summary of the pulse program
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Paladin 172 4X2 pro - SC 28.X2 pro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Paladin 172 4X2 pro - SC 28.X2 pro in de taal/talen: Engels als bijlage per email.

De handleiding is 0,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Paladin 172 4X2 pro - SC 28.X2 pro

Paladin 172 4X2 pro - SC 28.X2 pro Gebruiksaanwijzing - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info