640535
3
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
2
EN
! CAUTION - SETTING UP THE GRINDER
The grinder must only be used in a place that is protected from dust and
dampness, that is well-lighted, out of the reach of children, and away from
gasses or other inammable or explosive liquids.
The grinder must be situated near a normal electrical outlet equipped with
earth (grounded).**Avoid using dangerous extension cables.
**GROUNDING INSTRUCTIONS.
A. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock. This tool is equipped
with an electric cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into a matching outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Do not modify the plug provided - if it will not t the outlet, have the proper outlet
installed by a qualied electrician.
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. The conductor with insulation having an outer surface that is green
with or without yellow stripes is the equipment-grounding conductor. If repair or
replacement of the electric cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal.
Check with a qualied electrician or service personnel if the grounding instructions
are not completely understood, or if in doubt as to whether the tool is properly
grounded.
Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole
receptacles that accept the tool’s plug. Repair or replace damaged or worn cord
immediately.
B. Grounded, cord-connected tools intended for use on a supply circuit having a
nominal rating less than 150V~. This tool is intended for use on circuit that has an
outlet that looks like the one illustrated in sketch A in gure. The tools has a grounding
plug that looks like the plug illustrated in sketch A in gure. A temporary adapter,
which looks like the adapter illustrated in sketches B and C, may be used to connect
this plug to a 2-pole receptacle as shown in sketch B if a properly grounded outlet is
not available. The temporary adapter should be used only until a properly grounded
outlet can be installed by a qualied electrician. The green-colored rigid ear, lug, and
the like, extending from the adapter must be connected to a permanent ground such
as a properly grounded outlet box.
GROUNDING PIN
COVER OF
GROUNDING
OUTLET BOX
METAL SCREW
ADAPTER
GROUNDING MEANS
Grounding methods
2. GENERAL INFORMATION
The manufacturer is not liable for damages in the following cases:
- failed observance of the instructions given herein;
- use of the machine other than that described in the “INTENDED USE” section;
- failed use in compliance with current standards on Health & Safety at the
workplace;
- Incorrect installation;
- lack of scheduled maintenance;
- modications or jobs that are not authorized by the manufacturer;
- use of non-original or inadequate spare parts;
- repairs that are not carried out by a specialist.
3. WARRANTY
The warranty validity is that acknowledged in the country of sale. Claims
under warranty will only be accepted if they are backed-up by the copy of the
purchase document (bill or receipt).
The guarantee becomes void if:
a)
the machine has been tampered with;
b) the machine has not been used according to this manual;
c) non-original parts, machines or grinding wheels have been tted on the grinder or
other parts that are not authorized by the manufacturer;
d) the machine has been powered at a voltage or frequency different from that written
in the rating nameplate.
4. USING AND KEEPING UP THE OWNER’S MANUAL
The characteristics and the information given in this manual are merely indicative. The
manufacturer reserves the right to add any modications to the grinder considered
necessary at any time.
It is forbidden to reproduce any part of this document without authorization on behalf
of the manufacturer.
The owner’s manual is integral part of the machine and must be kept in a safe place
so that it can be consulted whenever need be.
If you should loose your manual or it should deteriorate, you can request your dealer
or an authorized service centre for another copy.
The manual shall accompany the machine at all times, especially if it is sold on at
a later date.
5. DEFINITIONS
Skilled technician: a person who is generally employed by the service centre and who
is trained to carry out extraordinary maintenance jobs and repairs on the machine.
6. SYMBOLS
This symbol points out the possibility of serious personal injuries if the
provisions and instructions are not complied with.
This symbol points out that the user must wear protection goggles when
he uses the machine.
This symbol points out that the user must wear protective gloves when
he uses the machine.
This symbol points out the correct running direction of the machine
(grinding wheel).
7. TECHNICAL DATA
Model 511AX
Voltage 120V~ 60Hz
Rated power 300W
Grinding wheel dimensions
Outside Ø :
Inside Ø:
Thickness:
5 3/4” (145 mm)
7/8” (22,2 mm)
1/8” (3.2mm)
3/16” (4.7mm)
5/16” (8.0 mm)
Maximum speed of grinding wheel 3400 min
-1
Max. power of lamp 15W
Acoustic pressure level 77 dB(A)
Level of vibrations on operating handle < 2,5 m/s
2
Types of chains that can be
sharpened
1/4” - .325” - 3/8” - .404” - 3/4”
Weight (complete machine) 13.25 pounds (6 kg)
8. PART DESCRIPTION (FIG.1)
1 Base unit 11 Arm operating handle
2 Arm-motor unit 12 Shield guard
3 Vise assembly 13 Arbor shield
4 Chain blocking handle 14 Grinding wheel
5 Vise adjustment knob 15 Sharpening depth adjustment knob
6 Chain jaws 16 Lock pin
7 Chain blocking unit adjustment knob 17 Lamp
8 Chain blocking unit adjustment knob 18 Main ON/OFF switch
9 Chain blocking unit 19 Electrical power cable
10 Arm blocking handle 20 Rating nameplate
9. SAFETY DEVICES
The grinder is equipped with the safety devices illustrated hereafter:
- Shield guards: they protect the operator from parts of the grinding wheel that may
come away during the sharpening process.
These guards must always be tted in place when the machine is in use.
Always make sure the guards are efcient and tted properly. Operator safety could
be compromised if the guards are damaged and/or cracked.
- Switch: the machine features a safety switch with release coil. In the case of a
sudden power failure, the switch trips automatically and disconnects the machine
from the mains. The machine will not start even if the power supply is suddenly
restored. You need to reset the switch to start the machine again.
- Lock pin: this is used to block the arm in the completely raised position.
When the pin is loosened, the arm is blocked. This condition is required when ad-
justing the sharpening angles, when replacing and dressing the grinding wheel.
When the pin is tightened, the arm is free to move. This condition is required during
the sharpening process.
10. INTENDED USE
This machine is an electrical grinder for chains used in chain saws.
- Use the machine exclusively for the types of chains stated in the technical data
chart.
- Do not use the machine to cut or grind anything other than the chains envisaged.
- Secure the machine rmly to the bench or wall.
- The machine must not be used in corrosive or explosive environments.
- Any other use is to be considered improper.
The manufacturer is not liable for damages following improper or incorrect use of
the machine.
P00801046_R05_511AX.indd 2 12/06/2009 9.02.11
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Oregon 511AX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Oregon 511AX in de taal/talen: Engels als bijlage per email.

De handleiding is 4,08 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info