601422
150
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
150
Troubleshooting
—Continued
Cant get 6.1 or 7.1 playback?
If no surround back speakers are connected, or Zone 2/3 is
being used, 6.1 and 7.1 playback is not possible.
If the SB Mode (5ch) is available in any sub-menu of the
Listening Mode Setup menu, make sure that it is not set
to Off (pages 106-112).
The volume cannot be set above 99?
When the levels of all speakers have been calibrated (page
94), the maximum volume setting may change.
Noise can be heard?
Using cable ties to bundle audio cables with power cords,
speaker cables, and so on may degrade the audio perfor-
mance, so dont do it.
An audio cable may be picking up interference. Try reposi-
tioning your cables.
The Late Night function doesnt work?
Make sure the source material is Dolby Digital (page 56).
The multichannel input doesnt work?
Check the MULTI-CH IN connections (page 66).
Make sure that the multichannel input is assigned to the
correct input source (page 66).
Set the audio input signal format to Multich (page 67).
About DTS signals
When DTS program material ends and the DTS bitstream
stops, the RDC-7.1 remains in DTS listening mode and the
DTS indicator remains on. This is to prevent noise when
you use the pause, fast forward, or fast reverse function on
your player. If you switch your player from DTS to PCM,
because the RDC-7.1 does not switch formats immediately,
you may not hear any sound, in which case you should stop
your player for about three seconds, and then resume play-
back.
With some CD and LD players, you wont be able to play-
back DTS material properly even though your player is
connected to a digital input on the RDC-7.1. This is usually
because the DTS bitstream has been processed (e.g., output
level, sampling rate, or frequency response changed) and
the RDC-7.1 doesnt recognize it as a genuine DTS signal.
In such cases, you may hear noise.
When playing DTS program material, using the pause, fast
forward, or fast reverse function on your player may pro-
duce a short audible noise. This is not a malfunction.
Theres no picture?
Make sure that all video connecting plugs are pushed in all
the way.
Make sure that each video component is properly con-
nected.
Make sure that the proper setting is made for the Video
Assign sub-menu under the Input Setup menu (page
99).
On your TV, make sure that the video input to which the
RDC-7.1 is connected is selected.
While the Pure Audio listening mode is selected, the video
circuits are turned off and the RDC-7.1 outputs no video
signals.
The onscreen menus (OSD) dont appear, or they
appear in an odd position?
Make sure that the proper setting is made for the Video
Output Assign sub-menu under the Speaker/Output
Setup menu (page 92).
Make sure that the proper setting is made for the OSD
Setup sub-menu under the Preference menu (page 120).
On your TV, make sure that the video input to which the
RDC-7.1 is connected is selected.
Reception is noisy, FM stereo reception is noisy, or
the FM STEREO indicator doesnt appear?
Relocate your antenna.
Move the RDC-7.1 away from your TV or computer.
Press the [Tuning Mode] button to turn off the AUTO
indicator, bringing the FM mode to monaural (page 62).
When listening to an AM station, operating the remote con-
troller may cause noise.
Passing cars and airplanes can cause interference.
Concrete walls weaken radio signals.
If nothing improves the reception, install an outdoor
antenna.
When the RDC-7.1 is unplugged or a power failure
occurred:
Normally, the built-in memory retains its contents for 2
weeks. If it loses radio presets, make the presets again.
The remote controller doesnt work?
Make sure that the batteries are installed with the correct
polarity (page 9).
Install new batteries. Dont mix different types of batteries
or old and new batteries (page 9).
Make sure that the remote controller is not too far away
from the RDC-7.1, and that theres no obstruction between
the remote controller and the RDC-7.1s remote control
sensor (page 9).
Make sure that the RDC-7.1 is not subjected to direct sun-
shine or inverter type uorescent lights. Relocate if neces-
sary.
If the RDC-7.1 is installed in a rack or cabinet with colored
glass doors, the remote controller may not work reliably
when the doors are closed.
Make sure youve selected the correct remote controller
mode (page 51).
When using the remote controller to control other manufac-
turers AV components, some buttons may not work as
expected.
Make sure youve entered the correct remote control ID.
If you change the remote controllers transmission signal
format to RF, be sure to select the same ID as the RF
receiver.
Cant control other components?
If its an IntegraRESEARCH component, make sure that
the cable and analog audio cable (RCA/phono) are
connected properly. Connecting only an cable wont
work (page 45).
Make sure youve selected the correct remote controller
mode (page 51).
Video
Tuner
Remote Controller
150

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo RDC-7.1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo RDC-7.1 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo RDC-7.1

Onkyo RDC-7.1 Gebruiksaanwijzing - Nederlands - 156 pagina's

Onkyo RDC-7.1 Gebruiksaanwijzing - Deutsch - 156 pagina's

Onkyo RDC-7.1 Gebruiksaanwijzing - Français - 156 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info