601422
149
Verklein
Vergroot
Pagina terug
1/156
Pagina verder
149
Miscellaneous
Troubleshooting
If you have any trouble using your RDC-7.1, look for a solu-
tion in this section. If you cant resolve the issue yourself, con-
tact the dealer from whom you purchased this unit.
Cant turn on the RDC-7.1?
Make sure that the power cord is properly plugged into the
wall outlet. And also, make sure that the other end of the
power cord is properly connected to the RDC-7.1s AC
INLET.
Unplug the power cord from the wall outlet, wait ve sec-
onds or more, then plug the cord in again.
The RDC-7.1 turns off as soon as its turned on?
The amp protection circuit has been activated.
Remove the power cord from the wall outlet immediately
and contact the dealer from whom you purchased this unit.
The [Standby] indicator on the RDC-7.1 remains lit?
It is supposed that the RDC-7.1 is using a source in Zone 2
or 3. When not using, set both Zone 2 and 3 to Off (page
71).
Theres no sound, or its very quiet?
Make sure that all audio connecting plugs are pushed in all
the way.
Make sure that the inputs and outputs of all components are
connected properly (pages 25-44).
Make sure that the polarity of the speaker cables is correct
and that the bare wires are in contact with the metal part of
each speaker terminal on the power amplier.
Make sure that the input source is properly selected (pages
52, 53).
Check the volume. It can be set from 81.5 to +18 (pages
52, 53).
The RDC-7.1 is designed for home theater enjoyment. It
has a wide volume range, allowing for precise adjustment.
If the MUTING indicator is shown on the display, press the
remote controllers [Muting] button to unmute the RDC-7.1
(page 54).
While a pair of headphones is connected to the Phones
jack, no sound is output by the speakers (page 54).
Check the digital audio output setting on the connected
device. On some games consoles, such as those that support
DVD, the default setting is off.
With some DVD-Video discs, you need to select an audio
output format from a menu.
Make sure that the correct input signal audio format is
selected with the [Audio SEL] button (page 57).
To use a turntable with an MC-type cartridge requires a
commercially available MC phono preamp (page 38).
Make sure that none of the connecting cables is bent,
twisted, or damaged.
Not all listening modes use all of the speakers.
Specify the Speaker/Output Setup and Input Setup (pages
92-102).
Only the front speakers produce sound?
When the Stereo listening mode is selected, only the front
speakers and subwoofer produce sound.
When the Direct or Pure Audio listening mode is selected,
only the front speakers produce sound.
Make sure the speakers are congured correctly (page 92).
Only the center speaker produces sound?
If you use the Pro Logic II/IIx Movie or Pro Logic II/IIx
Music listening mode with a mono source, such as an AM
radio station or mono TV program, the sound is concen-
trated in the center speaker.
Make sure the speakers are congured correctly (page 92).
The surround speakers produce no sound?
When the Stereo, Direct, or Pure Audio listening mode is
selected, the surround speakers produce no sound (page
58).
Depending on the source and current listening mode, not
much sound may be produced by the surround speakers.
Try selecting another listening mode.
Make sure the speakers are congured correctly (page 92).
The center speaker produces no sound?
When the Stereo, Direct, or Pure Audio listening mode is
selected, the center speaker produces no sound (page 58).
When the listening mode is set to Mono, no sound can be
present in the center speaker.
Make sure the speakers are congured correctly (page 92).
The surround back speakers produce no sound?
The surround back speakers are not used with all listening
modes. Select another listening mode (pages 58-60).
Not much sound may be produced by the surround back
speakers with some sources.
If the SB Mode (5ch) is available in any sub-menu of the
Listening Mode Setup menu, make sure that it is not set
to Off (pages 106-112).
Make sure the speakers are congured correctly (page 92).
The subwoofer produces no sound?
When you play source material that contains no informa-
tion in the LFE channel, the subwoofer produces no sound.
Make sure the speakers are congured correctly (pages 92,
93).
Theres no sound with a certain signal format?
Check the input signal format setting. Depending on the
playback source, you can select Auto, Multich, Analog, or
i.LINK (page 57).
Check the digital audio output setting on the connected
device. On some games consoles, such as those that support
DVD, the default setting is off.
With some DVD-Video discs, you need to select an audio
output format from a menu.
Depending on the input signal, some listening modes can-
not be selected (pages 143-145).
Cant select the DTS-ES Discrete/Matrix or THX Sur-
round EX listening modes?
These modes cannot be selected when no surround back
speakers are connected, or Zone 2/3 is being used.
If the SB Mode (5ch) is available in any sub-menu of the
Listening Mode Setup menu, make sure that it is not set
to Off (pages 106-112).
Power
Audio
149

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Onkyo RDC-7.1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Onkyo RDC-7.1 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Onkyo RDC-7.1

Onkyo RDC-7.1 Gebruiksaanwijzing - Nederlands - 156 pagina's

Onkyo RDC-7.1 Gebruiksaanwijzing - Deutsch - 156 pagina's

Onkyo RDC-7.1 Gebruiksaanwijzing - Français - 156 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info