618128
4
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
4
MIXTRACK PRO II SETUP
1. Place Mixtrack Pro II on a flat, stable surface.
2. Make sure all devices are turned off and all faders and gain knobs are set to “zero”.
3. If using a microphone, connect it to Mixtrack Pro II’s mic input.
4. Connect Mixtrack Pro II’s outputs to power amplifiers, tape decks, and/or other audio sources.
5. Plug all devices into AC power.
6. When powering everything on, power on your devices in the following order:
Your computer
Any amplifiers, speakers, or output devices
7. Locate the Serato DJ Intro installation card in the box to download and install the software.
8. Open your software program and load music to the decks.
9. Start DJ’ing!
10. When powering everything off, power off your devices in the following order:
Any amplifiers, speakers, or output devices
Your computer
TOP PANEL
1. Browser Knob – Rotate the knob to cycle through folders and tracks. When a folder is selected, press
the knob to enter it. (Press BACK to move up to the previous level.)
2. Load – Press one of these buttons while a track is selected to assign it to Deck A or B, respectively, in
the software.
3. Back – Cycles between the file structure and the music library in the software.
4. Shift – Allows multiple control commands to be triggered when pressed first along with other buttons.
5. Play/Pause – Starts and suspends playback.
6. Cue Button – Sends pre-fader audio to the Cue Channel for headphone monitoring.
7. Cue (Transport Control) – Sets and recalls the main Cue point in the current track. Hold down the
CUE button for temporary play of the cue point. The track will play for as long as the button is held
down and return to the cue point once it is released.
8. Platter/Jog Wheel – This capacitive, touch-sensitive jog wheel controls the audio when the wheel is
touched and moved. When the Scratch button is not active, use the wheel to bend the pitch of the
track. When the Scratch button is active, use the wheel to grab and move the audio, "scratching" the
track as you would with a vinyl record. You can also grab the non-touch-sensitive outer wheel to bend
the pitch of the track.
9. Scratch – Controls the behavior of the platters. When not active, the platter will function as Pitch Bend.
When active, the platter will have the ability to scratch.
10. Pitch Fader – Controls the tempo (speed) of the individual decks.
11. Pitch Bend Down – Press and hold to momentarily reduce the speed of the track.
12. Pitch Bend Up – Press and hold to momentarily increase the speed of the track.
6
6
14
14
14
14
12
12
14
14
14
14
14
14
14
14
15
15
11
11
12
12
11
11
10
10
10
10
13
13
13
13
5
5
20
20
21
21
22
22
23
23
27
27
27
27
28
28
28
28
30
30
20
20
21
21
22
22
23
23
26
26
24
24
25
25
24
24
32
32
32
32
7
7
29
29
29
29
17
17
18
18
19
19
17
17
18
18
4
1
3
2
2
8
8
15
15
4
16
16
31
31
9 9
16
16
19
19
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Numark Mixtrack Pro II bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Numark Mixtrack Pro II in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 7,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info