64738
54
Verklein
Vergroot
Pagina terug
1/57
Pagina verder
IP8540 User Guide
49
The phone software has restarted in an unusable state. Power cycle the phone.
I am trying to login for the first time and I do not see the PIN option.
Contact your IT Help and check:
ü Ensure PIN is enabled on OCS (pool level->FrontEnd Properties->VoIP tab).
I am trying to configure fingerprint, but the phone does not seems to recognize my swipes.
Click Use Pin Configurationon menu bar and click Use finger print Configurationon menu
bar. Now, try finger swipe again.
If on repeated tries it still does not work, see Unexpected behavior section below.
I used my fingerprint as the unlock mechanism, but on every attempt my finger swipe is not being
recognized. My phone is locked and I am stuck.
Try to do a full-length clean finger print swipe slow and easy.
Repeat above step few times and if it still does not recognize your finger swipe, then use small
recessed button in the wiring cavity. The recess button is located between USB and headset
connectors. Use a small (non-metallic) point to press the button. This will take you back to the
factory defaults.
How can I restore my device to factory defaults?
A small recessed button is located in the wiring cavity between USB and headset connectors.
Use a small (non-metallic) point to press the button. This will take you back to the factory
default
On device boot-up, calibration screen shows press enter to accept. I do not see enter on the phone.
Use Selectbutton in the center of the Scroll wheel in lieu of Enter.
My screen calibration seems off and I cannot click anything on the screen.
Recalibrate the touch screen. Tap Calibrate Touch Screen in the Settings menu to recalibrate
the screen.
5.2 Placing Calls
When I press the Help button or the Setting button there is no response.
Contact your IT Help and check:
ü Ensure you are signed into OCS service.
As soon as I call <xyz>, it shows call as active and hold.
In the active call display, Hold is a softkey. Tapping the Hold softkey places the connected
party on hold.
Before I complete my dialing, the call is initiated with invalid number.
See Unexpected Behavior later in this section.
Contact your IT Help and check
ü Most probably dialing plan has overlapping rules causing one rule to override other.
Remove overlap rules or reconfigure dial plan to remove any conflicts.
I called someone but there is no speech path.
Tap Hold and then tap the call in the active call list and see if speech path is recreated.
See Unexpected Behavior later in this section.
Contact your IT Help and check:
ü Are you traversing firewall? If so, make sure MRAS has been configured correctly.
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Nortel IP Phone 8540 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Nortel IP Phone 8540 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info