519647
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
May 2008
This symbol was placed in accordance with the European Union Directive
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should be
treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
© 2008 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks
of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
Using the Status Bar
1. For connection details, check the status bar, located at the bottom of the Settings tab.
Understanding the Status Bar
Wireless network Identifies which wireless network you have joined.
Security A closed lock indicates that security is enabled.
An open lock indicates an open network without wireless security.
Channel The wireless channel used by the network. If many wireless
networks in your area use the same channel, they can interfere with
one another.
Data rate Wireless data rate measured in Megabits per second. To optimize
wireless data rate, connect to a network with a high-speed router or
access point and a high-speed Internet connection.
Signal strength More dots indicates a stronger signal. Usually, you experience
higher throughput when the signal is strongest.
Join a Network Click Join a Network to start the Connection Wizard.
Wireless
network
Connection status
Security
Join a Network
Channel
Data rate
Signal
strength
2. When you are finished reviewing the Settings tab, click Close.
You can use the icon at any later time to access your adapter settings. For
information about all settings available for your wireless adapter, refer to the
NETGEAR RangeMax™ Wireless-N USB 2.0 Adapter WN111v2 User Manual on the
Resource CD.
Using the USB Cable and Cradle
You can attach the wireless USB adapter directly to a USB port on your computer, or use
the USB cable to extend the range and obtain better wireless reception. Use the USB
cable, plastic cradle, and loop-and-hook fastener for better adapter placement on a
computer monitor.
1. Attach the first fastener.
The wireless USB adapter comes with three black
fasteners. Locate the one with a prickly side, and attach it
to the plastic cradle on the middle of the outside
rear.Insert the adapter in the plastic cradle.
2. Connect the USB cable.
3. Place the other fasteners.
Place one of the other pieces of loop-
and-hook fastener on the side or back of
your monitor near the top for better
reception.
Connection
status
The status of your network connection.
Connected to Internet. The wireless Internet connection is OK.
Connected to Router. The wireless connection to the router is
OK, but the router is not connected to the Internet.
169.254.x.x or ___.___.___.___ . The wireless connection to the
router is OK, but there is a problem with the router. See the
NETGEAR RangeMax™ Wireless-N USB 2.0 Adapter WN111v2
User Manual on the Resource CD.
Understanding the Status Bar (continued)
Then join the pieces of the fastener to attach the USB adapter in the plastic cradle to
the monitor.
Technical Support
After completing the Smart Wizard configuration assistant, locate the serial number on the
bottom label of your product, and use it to register your product at
http://www.NETGEAR.com/register.
Registration on the website or over the phone is required before you can use our telephone
support service. The phone numbers for worldwide regional customer support centers are
on the Warranty and Support Information card that came with your product.
Go to http://www.netgear.com/support for product updates and Web support.
Attention: When you configure the wireless settings of this device,
please make sure to select the correct country settings. Due to EU
law, the country settings must be identical to the country where the
device is operating.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Netgear WN111v2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Netgear WN111v2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info