646447
2
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
NetBotz CCTV Adapter Pod 120
2 NetBotz CCTV Adapter Pod 120
Installing the CCTV Adapter Pod 120
To install your pod, simply connect your video source to the appropriate DIN, BNC, or RCA
video input jack on the pod. Then, use the USB cable to connect your pod to your NetBotz
500 or 420 appliance, or to a USB hub that is connected to the NetBotz appliance. To reduce
radio frequency noise and emissions from the USB cable, clamp one clamp-on ferrite onto
the USB cable within 2-3 inches of the end that connects to the pod, and the second clamp-on
ferrite onto the USB cable within 2-3 inches of the end that connects to your NetBotz
appliance or to the USB hub.
Configuring the CCTV Adapter Pod 120
Once you have connected your CCTV Adapter Pod and video source to your NetBotz
appliance, you will need to use the Advanced View to configure the pod.
To configure your pod:
1. Start the Advanced View and then select from the Appliance drop-box the IP address of the NetBotz
appliance to which you have connected the CCTV Adapter Pod. Be sure to log into the appliance using a
user account that has administrator privileges. Once you have logged in, confirm that the newly
connected CCTV Adapter Pod appears in the Navigation Pane. The default label for CCTV Camera Pod
120s is CCTV Video Pod serial, where serial is the serial number of the pod.
2. Select the Configuration button and then double-click on the Camera Pods icon (located in the Pod/
Sensor Settings portion of the Configuration pane).
3. Select from the Camera Pod Configuration pane the entry that corresponds to the CCTV Adapter Pod and
then click Capture.
4. The Camera Capture Settings window opens. In addition to the fields that are typically available when
using this window to configure Camera Pod 120s, one additional control is available when configuring a
CCTV Adapter Pod:
Video Format: Used to specify the format in which video is transmitted by the video source. Available
selections include: NTSC-M, NTSC-Japan, PAL-B, PAL-D, PAL-G, PAL-H, PAL-I, PAL-M, PAL-N
Combination, and SECAM.
5. Use the controls in the Camera Capture Settings window to configure the camera and image capture
settings for use with the pod. To see an example of an image capture using the currently selected Video
Format, Brightness, Contrast, and Image Quality settings click Apply and the sample image in the
Capture window will be updated using the new values. When you are finished, click OK and any changes
you have made will be saved to the appliance.
Note
The NetBotz appliance to which the CCTV Adapter Pod will be connected must
be running BotzWare 2.1 or later, and the Advanced View interface that will be
used to configure the pod must also be 2.1 or later. Before continuing, please use
the Advanced View Upgrade task to download and install the latest available
applications from NetBotz.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw NetBotz CCTV Adapter Pod 120 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van NetBotz CCTV Adapter Pod 120 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info