Handleiding Navitel Navigator 9 (pagina 2 van 2) (Engels)

698719

Verklein

Vergroot

Pagina terug

1/2

Pagina verder

№ Name Function

20 Point on the map

Short tap on the map marks the point for further operations with it: saving as a

waypoint, adding to the route or viewing the object’s data, and others.

21 Updates*

Provides access to the program and map update menu screen.

22 Track recording

Button for track recording: red dot– recording is on, grey dot – recording is

stopped.

23 Navitel.Trafc*

The icon displays general trafc intensity on ten-point scale. Tapping on the

button

shows the menu for controlling the “Navitel.Trafc” service.

24 Navitel.SMS*

The icon allows reading/sending messages and using coordinates in them. It also

shows the number of unread messages.

25 «Go!»

Tapping on the button gives a command to the program to calculate a route from

the current position or the set initial point to the selected point.

26 «Set Start»

Tapping on the button determines the selected point as a starting point of the

route

(GPSreceiver must be switched off).

27 «Set Finish»

The button is active only when there is an existing route. Pressing the button

continues the route up to the selected point making it the destination point of the

route.

28 «Route through»

The button is active only when there is an existing route. Pressing the button marks

the selected point as a point to be included in the route. The last added

point becomes

the rst one in the route after the starting point.

29 Map Back to map.

*  functionality is available only for devices, having access to the Internet

Routing

2.1

Route to a point selected on the map

You can have a route planned to a point, which can be found and marked on the map and then set as the

destination, while

current position of the device, determined by the GPS system becomes the starting point.

To plan a route press on the map to

mark the point, select “Cursor” [1] and then “Go!” [2]. The program will

offer 3 alternate routes with an approximate distance and time to the nish point [3]. Press «Go!» to start

follow the route [4].

Fig. 1 Fig. 2

Fig. 3 Fig. 4

Fig. 1

Fig. 2

Fig. 3

Fig. 4 Fig. 5 Fig. 6

Fig. 7 Fig. 8 Fig. 9

2.3 Manual setting of all route points

To plan a route, where the starting and the destination points are determined manually, rst mark a point

on the map where

you plan to start and press «Cursor» [1] to proceed to the «My route» screen. Tap on

the information panel at the bottom of the

screen [2]. Press «Set start» in the «Properties» screen [3]. The

GPSreceiver must be switched off. The point will be marked

on the map as a starting point. Select a

destination point on the map: tap on the map to mark the point, press «Cursor» [4] and

then press «Go!» in

the «My route» screen [5]. The program will offer 3 alternative routes. Select the route and press «Go!» [6].

Fig. 1 Fig. 2 Fig. 3

Fig. 4 Fig. 5 Fig. 6

Some additional features

For those devices which support Internet connection, various NAVITEL

online services, including “Navitel.

Trac” and

“Navitel.Friends” are available.

3.1

Navitel.Trac

The service provides and displays realtime information about density

of trac on the map. If a part of a road is marked green

on the map

this means that road trac here is normal, if it is marked yellow – traf

c is rather dense, orange – trac is heavy,

red – there is a trac jam

[1]. To set the service select “Menu” → “Settings” → “Online services”.

Fig. 1

3.2 Navitel.Friends

The “Navitel.Friends” interactive service allows viewing positions of

friends on the map in realtime mode, to plan a route,

using their coor

dinates, to share coordinates of other points and exchange messages.

To turn the service on select “Menu” →

“Settings” → “Online services”

and set the switch in the “Turn on Navitel.Friends” eld to “On” posi

tion.

Fig. 2

web: www.navitel.cz

2.2

Route to an address

To have a route calculated to a point of a known address, press “Menu” in the bottom left corner of the screen

[1] → “Find” [2] →

“By address” [3], then press “Select country” and start entering the name of a country

[4]. Press the icon in the upper right part of the screen to hide the keyboard. Select the country [5]. “Select

city”, “Select street” and «Select a building» become active only if the previous elds were lled out [6]. When

all information is entered the object will be shown in the screen [7]. Press «Go!». The program will offer 3

alternative routes [8]. Press «Go!», now you can follow the route [9].

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Navitel Navigator 9 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Andere handleiding(en) van Navitel Navigator 9

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info