707112
77
Verklein
Vergroot
Pagina terug
1/152
Pagina verder
Mode Menu Values for Pedals (Switch)
For the button-like control elements listed in the above table, and only for some of the MIDI mes-
sage types available for these control elements, you can choose from different behaviors for the
way the data is sent. This is controlled by the Mode menu. This menu can have up to four entries,
depending on the message type that you have selected in the Type menu. Here is the list of all
possible entries:
Toggle: In this mode, the control element has two states, On and Off. If you press once, it
switches to the On state if you press again, it switches to the Off state. This can be useful
for example for activating some effect, then deactivating it later. This is usually the default
mode. In this mode, you find two numeric fields: Off Value defines the value for the Off state
(from 0 to 127, 0 by default), and On Value defines the value for the On state (0 to 127, 127 by
default). For the Note message type, since the Off state is predefined (it’s the MIDI Note Off
message), you find instead a single Value parameter defining the velocity of the MIDI Note On
message.
Gate: This mode is equal to Toggle with the difference that the state is active for the time the
Pedal is held depressed. In Toggle mode the state is activated until the next time the Pedal is
pressed again.
Trigger: In this mode, only one message is sent when you hit the control element. There are
no On or Off states. For example, this can be useful for switching to another program (preset,
patch…) or for triggering one-shot samples (e.g., drum sounds or any other envelope-control-
led sounds). In this mode, you thus find only one numeric field called Value, defining the value
to be sent when you hit the control element. It goes from 0 to 127 (127 by default).
Inc: In this mode you can configure the press of a pedal to step through a list of values by
choosing the size of the jump (e.g., 1-2-3-4-5, 2-4-6-8-10 or 3-6-9-12-15), and whether or not
the values wrap around back to the beginning, or stop when they reach their minimum or maxi-
mum.
9.7.4. Assignments for Continuous Pedals
For Pedals used as continuous control, the Type menu offers the entries Control Change and
Program Change. Depending on the selected entry, a different set of additional parameters is
available:
Type Mode Range Number
Control Change From 0-126 / To 1-127 0-127
Program Change From 0-126 / To 1-127
For Control Change, you can set the Range of values that is sent when pressing the pedal, and
the Number of the Control Change message. For Program Change, you can set the Range of
values that is sent when pressing the pedal.
Using the MIDI Assignment Editor
71
77

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Native Komplete Kontrol A49 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Native Komplete Kontrol A49 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info