707112
75
Verklein
Vergroot
Pagina terug
1/152
Pagina verder
3. Click Rename to confirm.
The MIDI Template name has changed.
9.7. MIDI Message Types and Assignments
In this section you find reference information about the MIDI message types provided in the Type
menu and about the several assignments for control elements and for Key Zones.
9.7.1. MIDI Message Types – Type Menu
For all control elements, the assignment definition starts with the same menu: the Type menu.
The Type drop-down menu specifies the type of MIDI message that has to be sent upon action on
this control element. Depending on the type of control element, the entries in this menu will differ
(for example, sending a “play” command from a knob wouldn’t make much sense).
All other parameters displayed in the Definition area depend both on the type of control element
that you are working on, and on the type of MIDI message selected in this Type menu.
Below is a list of all possible MIDI message types to be found in the Type menu.
Control Change: Sends MIDI Control Change messages on a specific MIDI channel set by the
Channel parameter (range from 1 to 16, 1 by default). This message changes the value of a
specific continuous controller of the MIDI destination controlling for example some effect’s
depth in your music application. The continuous controller (CC) number is specified via the
Number parameter (range from 0 to 127). The values to be sent for that controller are specified
in various ways, depending on the type of the selected control element (see next sections).
Program Change: Sends MIDI Program Change messages on a specific MIDI channel set by
the Channel parameter (range from 1 to 16, 1 by default). This message switches to another
program (or patch, preset…) of the MIDI destination. The program number to be sent can be
specified in various ways, depending on the type of the selected control element (see next sec-
tions).
Note: Sends MIDI Note On/Off messages on a specific MIDI channel set by the Channel pa-
rameter (range from 1 to 16, 1 by default). These messages start and stop MIDI notes specified
by the Note parameter (range from C-2 to G8), at a velocity set by the Value parameter (range
from 0-127).
Pitchbend: Sends MIDI pitchbend messages on a specific MIDI channel set by the Channel
parameter (range from 1 to 16, 1 by default). This message changes the pitch of the MIDI
notes sent on the same MIDI channel. Depending on the MIDI destination, it can also be used
to control other parameters.
Off: Deactivates MIDI for the control element. Select this entry to disable the control element or
action. The control element/action does not send any MIDI message, hence no parameter is
displayed.
Using the MIDI Assignment Editor
69
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Native Komplete Kontrol A49 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Native Komplete Kontrol A49 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info