628910
23
Verklein
Vergroot
Pagina terug
1/92
Pagina verder
Operating Instructions
Power Peak
®
D7 EQ-BID
Order No.
8129
8
7. MEMORY NAME MENU
Any of the twenty available memory places can be selected in
the "MEMORY NAME" display. In this menu it is also possible to
program all the parameters for the active memory.
Use the "+" and "-" buttons to select the line you wish to program.
Once you have marked the appropriate line with the arrow, you
have to activate the parameter by pressing the "START / ENT."
button (dark background). The value to be changed can then be
altered using the "+" and "-" buttons. When the value has been
changed, press the "START / ENT." button to save the value.
When the line for entering the battery type is active, you can use
the "+" and "-" buttons to select one of the following battery types:
Nickel-Cadmium bat-
tery (NiCd), Nickel-
Metal-Hydride batte-
ry (NiMH), Lithium-
Polymer battery
(LiPo), Lead-Acid
battery (Pb), Lithium-
Ferrophosphate bat-
tery (LiFe), Lithium-
Ion battery (LiIo).
Pressing the
"START / ENT." but-
ton again activates
the line for entering
the number of cells.
Use the "+" and "-"
buttons to set the
battery voltage / cell count.
In the line for entering the capacity you can press the "+" and "-"
buttonstoadjustthebatterycapacityin100mAhincrements.
•NC / NiMH max. 60 Ah
•Lithium max. 60 Ah
•Lead-acid/Pb max. 60 Ah
When the "Charge current" line is active, the charge current can
be defined within the range 0.1 A to 20 A in 100 mA increments.
Be sure to observe the battery manufacturer's specification.
In the "Discharge current" line the discharge current can be
entered in the same way, within the range 0.1 A to 10 A, again in
increments of 100 mA.
The final discharge voltage (Discharge volt.) per cell can be
adjustedbypressingthe"+"and"-"buttonsinincrementsof0.1
V,accordingtothebatterytype.
•Nickel-Cadmiumbattery(NiCd): 0.1-1.1V/cell
•Nickel-Metal-Hydridebattery(NiMH): 0.1-1.1V/cell
•Lithium-Polymerbattery(LiPo): 3.0-3.3V/cell
•Lithium-Ferrophosphatebattery(LiFe): 2.6-2.9V/cell
•Lithium-Ionbattery(LiIo): 2.9-3.2V/cell
•Lead-Acidbattery(Pb): 1.8-2.0V/cell
Factory settings are guide values only.
Thefunction"TVCvoltage"(TerminalVoltageControl)isusedto
alter the final charge voltage for Lithium batteries. The value is
entered as a voltage per cell.
Theadjustmentrangeextendsfrom3.58-4.25Volt/cell,depen-
ding on battery type. This value is stored permanently in the
"Memory name" menu. If a BID chip or key is connected, these data
are only stored temporarily.
Important note:
SettingthecorrectvalueforTVCvoltageistheresponsibilityofthe
user, and is excluded from the guarantee.
Ifthe"TRICKLE CURRENT"lineis activated, youcan adjust the
trickle charge current for NiCd and NiMH batteries in increments
of 1 mA. For these battery types the range lies between OFF and
50 - 300 mA.
The Delta-Peak cut-off sensitivity (Peak sens.) can be set for NiCd
and NiMH batteries.
•Nickel-Cadmiumbattery(NiCd): 3-15mV/cell
•Nickel-Metal-Hydridebattery(NiMH): 3-15mV/cell
The table on the next page shows an overview of all the parameters
andadjustmentrangesfortheindividualbatterytypes.
(01) Memory name. .
LiPo7.4V2000mAh
Chg Current : 2.0 A
dChg Current : 1.0 A
dChgVolt :3.2V/C
TVCVolt :4.20V
(01) Memory name . . .
NiMH 6 cells 2000 mAh
Chg Current : 2.0 A
dChg Current : 1.0 A
dChgVolt :1.0V/C
Trickle : 100 mA
DeltaPeak : 4mV/C
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Multiplex Power Peak D7 EQ-BID - 30 8129 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Multiplex Power Peak D7 EQ-BID - 30 8129 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 9,26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info