5
1. Before first use thoroughly clean your Stand
Mixer and accessories in hot soapy water.
2. Before switching on your Stand Mixer, make sure
the Speed Dial (6) is at the off position, and then
attach the Whisk (9), Beater (10) or Dough Hook
(8).
3. Always turn the Speed Dial (6) to off position and
unplug the cord from power outlet when mixing is
completed.
4. The maximum operation time should not exceed
10 minutes.
CAUTION: A minimum of 20 minutes rest time
must be maintained between two consecutive
cycles.
5. Always follow the recommended quantities,
processing time and speed setting. Do not
exceed the suggested processing speed to avoid
damage to the machine.
IMPORTANT:
1. The appliance will only start when the Head (4)
is in the lowered position and locked.
2. If the bowl is too full the appliance will be
overloaded and stop. To restart the appliance,
turn the Speed Dial (6) to the off position and
remove some of the ingredients. Allow the
appliance to cool down for 20 minutes, then
restart.
CAUTION: If the Blender Cover (1) is not fitted
correctly the mixer will not switch on.
Assembling the accessories.
1. Press the Head Release Button (5) to release the
Head (4) and raise it until it locks into place.
2. Lock the Bowl (11) clockwise on the appliance
and put the ingredients in.
3. Insert the desired accessory (8, 9, 10) on the
Accessory Socket (3), push and rotate to lock the
accessory in position.
4. Press the Head Release Button (5) and manually
press the Head down (4) until it locks to its closed
position.
5. Slide the Splash Guard (7) over the Bowl (11).
NOTE: It is not essential to use the Splash
Guard (7) but it helps prevent splashing.
Before First Use Assembling Your Stand Mixer
