494812
5
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
12
Learning missing functions from an original remote control and saving
them on any button on the Universal 5 web
To acquire signals you must rst make sure that the remote controls are the correct distance apart:
At this point the maximum data exchange distance between the two remote controls will have been
reached. To acquire signals the remote controls must now be positioned at half this distance and then not
moved any further until the process has terminated.
Important: when you release the button, if the LEARN button light comes on again, press the same button
on the original remote control again until the light goes out once more.
Having programmed the Universal 5 web, every time you press a button linked to a LEARN command,
both the light corresponding to the device being used and the LEARN button light will come on.
1. Position the original remote control in front of the
universal remote control so that the areas which emit the
infrared signals are opposite each other at a distance of
approximately 5 cm.
2. Press the LEARN button for an instant and then, within
ve seconds, press and hold down any button on the
original remote control. The green light under the LEARN
button should then start ashing. If it doesn’t move the
remote controls closer together.
3. Gradually increase the distance between the two remote
controls, making sure that they stay aligned until the
point at which the green light under the LEARN button
stops ashing.
5 cm
max. dist.
4. Press the selection button for the required device for an
instant.
5. Press the LEARN button for an instant together with
one of the F1 - F2 - F3 - F4 buttons or any other normal
button you wish to save the new function on.
6. The green light on the LEARN button will light up in
steady mode to indicate that it is waiting to receive a
signal from the original remote control.
7. On the original remote control, press the button
corresponding to the signal you wish to capture and hold
it down until the green light on the LEARN button goes
out.
or
or
or
8. If the procedure has been completed successfully the
red light corresponding to the selected device gives
three long ashes. Only at this point will the remote
control be ready to capture other signals to be saved on
other buttons.
or or or or
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Meliconi Gumbody universal 5 web bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Meliconi Gumbody universal 5 web in de taal/talen: Engels als bijlage per email.

De handleiding is 0,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info