785086
33
Verklein
Vergroot
Pagina terug
1/35
Pagina verder
33
The machine must be connected by a certified electrician. A 1x16A fuse and 30mA
current leakage fuse should be used at a maximum height of 170cm for the 230v
machine. For the 400v machine you should use a 3x16A fuse.
The protective film on the machine must be removed first after installing the
machine.
The power supply cable (5x2.5 mm2 H07 RNF), water supply connection (3/4) and
water drain hose come with the machine
Where the machine is installed, at a height of 25/75cm there should be a ½ water
supply with ¾ valve for the fresh water inlet of the machine. At a height of about
2cm there should be a drain pipe in the wall or ground where the machine is placed.
When using the VN500 Ultra this may be put higher (Max 70CM).
A ventilation system with cooker hood should be present where the machine is
installed. The user must ensure that the control and electricity in the machine
remains free from moisture, condensation and vapour.
The leveling feet are height-adjustable. They should be adjusted according to the
ground floor and entry and exit stands, allowing the machine to operate in a leveled
position.
The manufacturer will not take responsibility for any damage or problems to the
machine or other machines, caused by other machines that are connected to the
same power board, supplying power to the machine. For this reason we advise you
to use a separate group/board for the machine.
Troubleshooting
1. Is the power supply connected properly and are the cables still good and not worn?
2. Does the machine have power? Is the fuse undamaged?
3. Is the cover closed properly?
4. Is the waterhose still connected to the valve and the machine? Is the water valve
opened? Is the hose still good and not worn?
5. Are the detergent and/or rinsing pumps still working and is there still enough in the
supply cans?
6. Are the detergent and rinsing hoses placed in the cans properly? And is there still
enough in both supply cans?
The earth installation for the power supply work, must be constructed
complying with the effective grounding regulations and must be evidenced
by certificates issued by relevant authorities. The service personnel who will
install the machine need to ground the machine with a cable connected to
the power supply, and connected to thegrounding end of the machine cable.
Only after this is done the water connections should be done and then the
machine can be operated. Make sure that all safety regulations are taken
into account while installing the machine. The manufacturer/importer and
dealer will not be responsible for any injuries, damage or other
consequences caused by not following the safety regulations.
Caution: Do not start or use the machine without connecting it to the
earth cable first.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Maxima VN-500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Maxima VN-500 in de taal/talen: Nederlands, Engels als bijlage per email.

De handleiding is 1.22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info