785624
13
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
EN / SCM20 & SCM40 PWM User’s Manual 13
3.8 COMMISSIONING AFTER INSTALLATION
CAUTION!
Check the polarity of all wiring before
commissioning: positive connected to positive
(red cables), negative connected to negative
(black cables).
1 If all wiring is OK, place the DC-fuse between the Solar
Chargemaster and the battery
WARNING
When placing this fuse, a spark can occur,
caused by the capacitors used in the Solar
Chargemaster. This is particularly dangerous in
places with insufficient ventilation, due to the
gassing of the batteries an explosion can occur.
Avoid having flammable materials close by.
2 Then. place the DC-fuse between the Solar
Chargemaster and the load.
3 The Solar Chargemaster will initiate the charging
process if the voltage from the PV array is sufficient.
If the Solar Chargemaster does not switch on,
press MENU shortly.
4 Refer to section 2.6 for settings.
3.9 DECOMMISSIONING
To put the Solar ChargeMaster out of operation, follow
these instructions in order of succession:
1 Switch off all loads that are connected to the Solar
Chargemaster;
2 Disconnect the PV array by switching off the switch
between the PV-array and the Solar Chargemaster (or
protect the PV-array from light exposure, e.g. by
covering the PV modules);
3 Remove the DC-fuse between the Solar Chargemaster
and the battery;
4 Remove the DC-fuse between the Solar Chargemaster
and the load;
5 Check with a suitable voltage meter whether the
Battery connection and the LOAD output of the Solar
Chargemaster are voltage free;
6 Disconnect the negative cable to the PV array from the
terminal block of the Solar Chargemaster. Isolate the
core of the wire with insulating tape;
7 Do the same for the positive cable to the PV array;
8 Disconnect all other remaining wiring.
Now the Solar Chargemaster can be demounted in a safe
way.
3.10 STORAGE AND TRANSPORTATION
When not installed, store the Solar Chargemaster in the
original packing, in a dry and dust free environment.
Always use the original packing for transportation. Contact
your local Mastervolt Service Centre for further details if
you want to return the apparatus for repair.
3.11 RE-INSTALLATION
To reinstall the Solar Chargemaster, follow the instructions
as described in this chapter (chapter 3).
3.12 CORRECT DISPOSAL OF THIS PRODUCT
(Waste Electrical & Electronic Equipment)
This product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. When
this crossed-out wheeled bin symbol is
attached to a product, it means the product is
covered by the European Directive 2012/19/EU.
Please be informed about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do not dispose
of your old products with your normal household waste.
The correct disposal of your old product will help prevent
potential negative consequences to the environment and
human health
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Mastervolt Solar ChargeMaster SCM40 PWM bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Mastervolt Solar ChargeMaster SCM40 PWM in de taal/talen: Engels als bijlage per email.

De handleiding is 0.73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info